|
Title: Horizontal Cutting of Styrofoam Post by: digitalgowda on February 19, 2015, 07:59:46 PM Hi
I bought 1 inch thickness Styrofoam from market. I need to cut it into half inch thickness. So, suggest me anyone who cuts my Styrofoam horizontally with half inch thickness. please share contact number and address Thanks in advance Ashwath 9844380830 Title: Re: Horizontal Cutting of Styrofoam Post by: ashok baijal on February 19, 2015, 08:25:38 PM You can cut it yourself. Hammer two nails on a flat surface and tie a thin steel or nichrome wire half an inch above the surface. Heat the wire by passing a low voltage current and slide the sheet below the wire. You should end up with a half inch thick sheet.
Title: Re: Horizontal Cutting of Styrofoam Post by: sahilkit on February 19, 2015, 08:38:07 PM simply put search for hot wire cutting.
Title: Re: Horizontal Cutting of Styrofoam Post by: sahilkit on February 19, 2015, 08:40:21 PM http://www.sciencetoymaker.org/airSurfKit/HotWireCutFoam.htm (http://www.sciencetoymaker.org/airSurfKit/HotWireCutFoam.htm)
http://www.rcindia.org/tools-materials-and-building-techniques/hot-wire-foam-cutter-tools-store/ (http://www.rcindia.org/tools-materials-and-building-techniques/hot-wire-foam-cutter-tools-store/) http://www.rcindia.org/self-designed-diy-and-college-projects/5th-sweepstakes-entry-diy-lipo-powered-hot-wire-cutter-k-k-iyer/ (http://www.rcindia.org/self-designed-diy-and-college-projects/5th-sweepstakes-entry-diy-lipo-powered-hot-wire-cutter-k-k-iyer/) Title: Re: Horizontal Cutting of Styrofoam Post by: digitalgowda on February 19, 2015, 08:50:48 PM How much current and voltage i have to set
Title: Re: Horizontal Cutting of Styrofoam Post by: sahilkit on February 19, 2015, 08:59:07 PM It depends on length and thickness of the wire. For say 2feet cutting length with a 28 swg or 24 swg wire will be good at 18-22volts @ 1.5+ amps (get yourself a low cost variable psu 30v/3amps)
Sahil Title: Re: Horizontal Cutting of Styrofoam Post by: K K Iyer on February 19, 2015, 09:15:41 PM @digitalgowda,
If you have a hot wire foam cutting bow like this: http://www.rcindia.org/self-designed-diy-and-college-projects/5th-sweepstakes-entry-diy-lipo-powered-hot-wire-cutter-k-k-iyer/ (http://www.rcindia.org/self-designed-diy-and-college-projects/5th-sweepstakes-entry-diy-lipo-powered-hot-wire-cutter-k-k-iyer/) You can slice the thermocol like this: https://m.youtube.com/watch?feature=youtube_gdata_player&v=iJfjr4yOB_I (https://m.youtube.com/watch?feature=youtube_gdata_player&v=iJfjr4yOB_I) www.youtube.com/watch?feature=youtube_gdata_player&v=iJfjr4yOB_I (http://) But you'll need a helper like RC Aunt! Much easier and simpler to just buy a thinner sheet from the stationery shop! Title: Re: Horizontal Cutting of Styrofoam Post by: sahilkit on February 19, 2015, 09:19:06 PM Did you just make the video
Title: Re: Horizontal Cutting of Styrofoam Post by: K K Iyer on February 19, 2015, 09:48:50 PM @sahilkit
Yes... That's why it took me some time to reply! Title: Re: Horizontal Cutting of Styrofoam Post by: sahilkit on February 19, 2015, 09:51:07 PM :D
Title: Re: Horizontal Cutting of Styrofoam Post by: digitalgowda on February 20, 2015, 12:12:28 PM Thanks a lot for your time.
May I know where can I get half inch Styrofoam in Bangalore. Please share Address and contact number.. Also, is there any rc plane expert who can help in designing my first RC plane by using Styrofoam. My Contact no, 9844380830 Thanks guys for the heartily support Ashwath Gowda |