Title: How to use the glue gun efficiently Post by: dileepbalan on December 02, 2011, 04:25:22 PM I brought glue gun long time back from the ebay, with no temp control. I found difficult to control the flow of melted glue. When I trigger melted glue comes out, but I noticed that after the use, it starts dripping. I think, I’m not squeezing too much. Are you facing similar issues?
Even I keep glue gun in vertical standing position (keeping the nozzle upside), few drops of glue comes out… Please share your tips / tricks :) Regards, Dileep Title: Re: How to use the glue gun efficiently Post by: raj09ec on December 02, 2011, 04:43:50 PM Hello,
i purchased glue gun a week ago for :Rs:120/- working nicely keep sm points in mind......... Plug the gun for getting hot keep in position of down nozzle over aluminium foil keep pressing trigger at sm interval wen glue starts coming out wipe nozzle over foil & point towards applying surface Use trigger to ooze out glue If glue is coming in excessive amount automatically swich off for sm minute Glue may continue to ooze out of the gun even when you aren’t squeezing the trigger. When you set the gun down, make sure to place a sheet of aluminium foil to prevent surface. Watch it http://www.youtube.com/watch?v=WGeujbfgEI8 (http://www.youtube.com/watch?v=WGeujbfgEI8) |