|
Title: Light Plywood for RC Post by: yashodhanp on April 27, 2015, 01:25:13 PM I got some plywood that is extremely strong, yet light and can be laser cut very easily as well.
Weighs around 100gms/sq ft (2.5mm thickness) and cuts very well on a laser and is WHITE. (http://s12.postimg.org/ssrovcdfh/20150427000645.jpg) Laser cut: (http://s8.postimg.org/yzb0jqw85/20150427002553.jpg) Regards Title: Re: Light Plywood for RC Post by: sahilkit on April 27, 2015, 01:54:07 PM nice, cost of the sheet and what is it called ?
Title: Re: Light Plywood for RC Post by: yashodhanp on April 27, 2015, 05:24:58 PM i dont know what it is called. they call it imported ply.
Title: Re: Light Plywood for RC Post by: lastRites on April 27, 2015, 06:59:34 PM Where did you get it laser cut from?
Title: Re: Light Plywood for RC Post by: yashodhanp on April 27, 2015, 09:05:04 PM Check PM
Title: Re: Light Plywood for RC Post by: sharlock on April 27, 2015, 09:05:58 PM were did you got this ply from & what dimensions are they available? I had been looking for this type of white ply 12 years back but never found this locally, I have been using a standard door skins that are 2-2.5 mm sheets can be as big as 8feet x 4 feet but again I choose from many sheets, the one one which is light in color & also light weight, this is very cheap way of building models, I usually get few parts laser cut & most of the parts are cut using my scroll saw.
|