|
Title: Thread lock Post by: K K Iyer on April 05, 2014, 01:38:21 PM Not everyone has access to thread locking compounds like Loctite etc.
But most homes will have a bottle of nail polish. In olden days we used to put a red dot on the nut/ bolt as thread lock. This can be opened later without any difficulty (unlike if you use Feviquik). Also there is a visual check of whether the nut has turned. Pic shows servo arm pushrod adjuster nut thread locked with nail polish. Title: Re: Thread lock Post by: punty on April 05, 2014, 02:03:57 PM A wonderful tip Sir.. :)
Title: Re: Thread lock Post by: Nithinraj Kotian on April 05, 2014, 02:57:22 PM Iyer sir... You can use Fevibond also as a thread lock and its easy to remove. Am using the same.
Title: Re: Thread lock Post by: utkarshg13 on April 05, 2014, 07:08:41 PM Again a good tip from Iyer sir :thumbsup: :thumbsup:
Title: Re: Thread lock Post by: Shyam Hembram on April 05, 2014, 07:30:27 PM finally I got answer to my question thnx to Iyer Sir
|