Title: want to make engine mount on spad Post by: satz flying on July 17, 2012, 12:25:46 PM give some idea to make engine mount on the spad plane.
Title: Re: want to make engine mount on spad Post by: satz flying on July 17, 2012, 12:28:55 PM i preferred ASP .61 for my engine.here my planehttp://www.rcindia.org/gas-glow-nitro-planes/all-new-spad-extra/ (http://www.rcindia.org/gas-glow-nitro-planes/all-new-spad-extra/).
tell some idea to fix the engine. :help: Title: Re: want to make engine mount on spad Post by: AEROVISHWA on July 17, 2012, 01:20:58 PM normally u have a firewall and a engine mount on it..! the engine goes on the mount..!
u will have to reinforce the part from the LE/wing saddle to the firewall .... to coupe for the vibrations from the engine the alone coro cant take..! make slots on to the fuse sides and slide in a firewall.... dont forget to gusset the back and front of the FW.... from the FW to LE use ply on the sides.... should work good... Title: Re: want to make engine mount on spad Post by: karma on July 18, 2012, 04:51:42 PM I once used a plastic kitchen cutting board for making an engine mount for my spad. The picture though is from http://images.rcuniverse.com/forum/upfiles/155231/Ay74280.jpg but the design was almost the same.
Title: Re: want to make engine mount on spad Post by: izmile on July 18, 2012, 05:40:14 PM Yes. kitchen chopping board works perfect. If you have a nose down crash the first thing to break is the chopping board. That takes away a lot of impact force and minimizes engine damage.
-Ismail |