RC India

RC Equipments => Tools, Materials and Building Techniques => Topic started by: dhaksha_dx on April 07, 2012, 09:32:44 PM



Title: Where in particular to get loctite/thread locker in bangalore
Post by: dhaksha_dx on April 07, 2012, 09:32:44 PM
in which particular shop and area do u get thread locker / loctite of blue color and 242 grade  in bangalore. please help me!I


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: rajathv8 on April 07, 2012, 09:41:58 PM
I purchased blue locktit from ModelArt at Forum Mall for 170.


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: dhaksha_dx on April 07, 2012, 09:45:08 PM
but of what grade 222 or 424,
and by the way which is stronger the 222 grade or the 424 grade


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: rajathv8 on April 07, 2012, 09:48:31 PM
Dont know what grade it is.


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: dhaksha_dx on April 07, 2012, 09:49:40 PM
can u please check it out and tell me bro


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: rajathv8 on April 07, 2012, 09:50:45 PM
It does not have any label on it. Just a bottle with thread-lock. :)


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: dhaksha_dx on April 07, 2012, 09:52:07 PM
oh then i think i have to call up model art only and find out


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: iamahuman on April 07, 2012, 10:15:40 PM
I bet they won't know. There's an authorized dealer for loctite in Peenya. I got my loctite from there.


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: dhaksha_dx on April 07, 2012, 10:18:56 PM
can u give me his number please


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: iamahuman on April 07, 2012, 10:28:24 PM
I'll find it and let you know tomorrow.


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: dhaksha_dx on April 07, 2012, 10:34:36 PM
ya sure , thanks.


Title: Re: Re: Where in particular to get loctite/thread locker in bangalore
Post by: netsecrets00 on April 08, 2012, 12:47:21 AM
Posted by ujjawnna

 Zenith Industrial Supplies, SP Road : They are dealer of most of Loctite/Mytlock product. I got all my Locktite from them

http://www.justdial.com/Bangalore/zenith-industrial-supplies-%3Cnear%3E-s-p-road/080P7084
 
Sent from my GT-I9100G using Tapatalk


Title: Re: Re: Where in particular to get loctite/thread locker in bangalore
Post by: netsecrets00 on April 08, 2012, 12:49:50 AM
In pune I got loctite 242 blue@ 450/-  for 50ml

Sent from my GT-I9100G using Tapatalk


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: rajsigma on April 08, 2012, 06:55:52 AM
Available in most 4 wheeler automobile shop. There is two type one is blue and other red . Blue-normal , Red-strong .


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: dhaksha_dx on April 08, 2012, 12:49:14 PM
i got anabond blue 122 thread locker, can it be used for assembling the rotor head ?


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: sujju on April 08, 2012, 01:38:13 PM
Preferably use loctite 242 only.


Title: Re: Where in particular to get loctite/thread locker in bangalore
Post by: lnk4c2wc on January 19, 2014, 05:33:14 PM
Sujju,

Thanks for helping me chosing a heli and  passionately explaining me the basics of heli.

And thanks for strongly advising me to apply loctite before revving up the heli. Very-very valuable advise.

While removing a screw in the rotor assembly (to apply loctite), it moved way too easily, as if I am turning a shaft and not a screw. And it turned out that the screw was damaged (sheared?). Half of it is still inside the hole. See attached pic. (Screw and hole marked with arrow)

I shudder to imagine how disastrous it would have been to rev this up, just to see whole machine tearing apart into pieces.

Thank you so much for the advice.