These are the equipments that I require specifically . Even 2nd hand equipments may do.
Full Chasis kit
1) a) Rear drive shaft or dog bone (as they are called in the rc hobby)
b) Front dog bone
2) Front and rear disk brakes.
3) Centre bulkhead.
4) Fuel tank
5) Centre differential and spur gear.
6) a) Rear chassis brace
b) Front chassis brace
7) Servo tray
Battery and receiver box
9) Rear shock tower. The shock tower has many different mounting holes for both the shock and camber link.
10) Rear camber link - turnbuckle (adjustable)
11) Rear hub carrier.
12) Rear suspension arm.
13) Rear sway bar.
14) Rear CVDc shaft.
15) Rear hub.
16) Rear differential housing, differential and rear bulk head.
17) Rear springs.
18) Rear shocks
In this example we are going to look at the front suspension on an rc nitro buggy. This example is of a Pivot Ball or Pillow Ball type suspension.
19) Upper and lower pivot/pillow balls. They thread into both the upper and lower arms.
This gives you the ability to change camber.
20) Front CVD
21) Front lower suspension arm
22) Upper suspension arm - A-arm.
23) Front shock tower.
24) Front drive shaft or dog bone.
25) Steering knuckle.
26) Front hub.
27) Front sway bar.
28) Front differential, differential housing and bulkhead.
For Control
1. Receiver 2. Fail safe
3. Servo for carburetor and brakes
4. Servo for steering
5. Receiver batteries 6. On / off switch
6. Suspension System
For Engine
1.Carburetor
2.Glow plug
3. I.C. Engine
For Steering
1.Wheels
2. Differential
3.Caster
4.Toe