|
Title: 12V UBEC for Vtx and Camera Post by: arun21 on December 11, 2014, 10:17:14 PM Wanted : 12V UBEC for FPV Setup. ( Power to Vtx and Camera )
Title: Re: 12V UBEC for Vtx and Camera Post by: sooraj.palakkad on December 11, 2014, 10:23:56 PM you can make it yourselves with a single 7812 3Pin voltage regulator.
Title: Re: 12V UBEC for Vtx and Camera Post by: arun21 on December 11, 2014, 10:33:47 PM Will this be good enough to power 12v vtx and fpv camera..?
www.reuk.co.uk/OtherImages/lm7812-12v-linear-voltage-regulator.jpg (http://www.reuk.co.uk/OtherImages/lm7812-12v-linear-voltage-regulator.jpg) Will use separate 3s 2200mah lipo to drive it. Title: Re: 12V UBEC for Vtx and Camera Post by: sooraj.palakkad on December 12, 2014, 07:04:14 AM yeah, that's the circuit I said with 7812, But you can't use 3S Li Po (3S LiPo's max. voltage is only 12.6 V, hence no need of additional regulator).
A regulator is needed only if yo are using anything bigger than 3S :) |