Title: 180 motor for metal coaxial Heli Post by: vishwasvm on March 22, 2011, 09:12:46 AM I have a metal coaxial 3 channel Helicopter. One of its motors is burnt out and needs replacement. From the internet sources I came to know that it employs 180 motor with pinion.
I want to ask if this is correct and do someone has the motor to spare. What is 180 motor?? Vishwas Title: Re: 180 motor for metal coaxial Heli Post by: vishwasvm on March 22, 2011, 07:32:30 PM Bump
Title: Re: 180 motor for metal coaxial Heli Post by: aditya on April 07, 2011, 12:14:31 PM can u send me pic of ur motor?
may b i can help u... Title: Re: 180 motor for metal coaxial Heli Post by: arjun2592 on April 10, 2011, 11:17:09 AM hi
i have 2pic 180 motors form the co-axil heli i had 1pic is in fine condition post some picks of your motor may be i can help Title: Re: 180 motor for metal coaxial Heli Post by: vishwasvm on April 10, 2011, 01:20:49 PM Dear Aditya and banboy,
I am at pune and will reach mumbai in the evening. I will post the pictures of motor then. The difference between the two motors is the shaft length. Thanks both of you. Vishwas Title: Re: 180 motor for metal coaxial Heli Post by: vishwasvm on April 11, 2011, 01:17:09 PM Dear Aditya and Banboy,
Following are snaps of the motors. It seems both the motors have gone bad. One of them rotates with jerk and other not at all. I dont intend to repair them. Hope you can help. Vishwas Title: Re: 180 motor for metal coaxial Heli Post by: aditya on April 11, 2011, 04:27:32 PM saw pics......
but not clear about specs of motor..... which heli. u r flying? Title: Re: 180 motor for metal coaxial Heli Post by: vishwasvm on April 11, 2011, 05:27:15 PM Some cheap chinese made Heli... Specifications; dont know
Vishwas Title: Re: 180 motor for metal coaxial Heli Post by: controlflyer on April 12, 2011, 12:15:19 AM I had a bunch of Co-axials, and I tried searching for these kinda motors every possible place in India without luck.
Finally ordered one from www.xenonproject.com If you order, it usually takes around 10 to 15 days for the package to arrive. OR You can try with rotor.co.in I seen they had a bunch of 180's with them, but that was around 3 years back.. Title: Re: 180 motor for metal coaxial Heli Post by: ajith on April 14, 2011, 05:29:30 PM try cleaning those gears and
If u are aware of parts inside a motor ....... and IF IT IS A " BRUSHED " MOTOR then there is some problem with the supply of power in the inside ....(as you told it is giving jerks) IF you have ever opened a DC motor (small) and confident open this one and check for such problem and You can REPLACE it easily with the brush from the motors in small toys all around us. Title: Re: 180 motor for metal coaxial Heli Post by: vishwasvm on April 14, 2011, 10:12:01 PM I tried to look inside the motor but it is not allowing me to do so without irreversible destruction. :banghead: Thanks all for your suggestions. :thanks:
Anyway, I have something interesting coming up so I am giving up on this heli. Moderator can close the thread. Vishwas |