|
Title: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: madaquif on May 25, 2015, 05:10:12 PM i urgently need 5 MM prop saver for sunnysky 2212 980 kv motors
http://www.quadkopters.com/product/brushless-motors/sunnysky-2212-980kv/ any lead will be highly appreciated. Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: satyagupta on May 25, 2015, 05:17:59 PM 5 mm nuts you would get it easily in any hardware store.
Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: madaquif on May 25, 2015, 05:20:06 PM satya sir,... i need prop savers....
edit pic added somthing like this...but ID of should match with the shaft of motor i intend to use this motor on a 3d model Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: satyagupta on May 25, 2015, 05:34:35 PM i dont think you would get something like that for SunnySky cos it comes with a threaded prop adapter. I might be wrong, but check with RCB
Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: SK1701 on May 25, 2015, 08:02:23 PM I don't think that would fit an x2212. It is designed to be tightened into the motor shaft, whereas the shaft of the SunnySky is very short and does not protrude out of the motor. You might be able to fit one on if you replace the stock shaft with a longer one.
Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: madaquif on May 26, 2015, 04:15:19 PM I checked the shaft of the motors.....its around 15mm....but its with thread.....
Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: SK1701 on May 26, 2015, 07:21:54 PM That is not the shaft. That is just the bolt on prop adapter. It is an M5 thread. If you remove it you will be able to see the shaft which is silver and does not protrude from the motor housing. That is what the prop saver is supposed to fit on. It is either 3 or 3.17 mm in diameter varying from originals to fakes. If you can get a longer one and put it in you will be able to fit a prop saver. But why do you want to put a prop saver on anyway? The stock adapter is very secure, especially with Nylock nuts.
Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: madaquif on May 26, 2015, 07:28:02 PM i intend to use this motor on a 3d model .
and m sure its gonna crash trillions of times.... ;D ;D Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: SK1701 on May 26, 2015, 07:35:08 PM ;D Then you will have to replace the shaft. I don't really think this motor is suited for a 3D model though. It is relatively low in power and has a short shaft (multirotor specific)
Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: madaquif on May 26, 2015, 08:03:15 PM well I had 2 spare motors ....wonder where I can use them now.... :banghead: :banghead:
Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: rajsachdev on May 27, 2015, 06:34:43 PM Having same problem, shaft of one broke while tightening and threads of second are worn out, experiment all the time and hence have to remove and put props back often, hence the wear and tear, hope there is something that matches Sunnysky. Wonder if there are any Sunnysky motor owners with bad motors and extra pair of prop saver/shaft out there ;)
Title: Re: 5 MM prop saver for sunnysky 2212 980 kv motors Post by: madaquif on May 27, 2015, 09:15:05 PM Hey raj....contact satya sir for spares of these motors....he might help
|