|
Title: Anybody have foam safe paint Post by: smithraj on September 12, 2012, 08:35:49 PM Hi friends..
Anybody have foam safe paint..?? or foam safe paint store in india ? pm me sj28550@gmail.com or call me 9922225585 :banghead: Title: Re: Anybody have foam safe paint Post by: VC on September 12, 2012, 08:59:42 PM I have been using ordinary enamel paint on foam. Ensure that you don't use Acetone / Thinner to dilute it. Either paint straight from the tin or use ONLY Turpentine to dilute it.
Title: Re: Anybody have foam safe paint Post by: magarwal1 on September 12, 2012, 09:51:29 PM Rustonium Paint Spray Cans..
Title: Re: Anybody have foam safe paint Post by: KALYANPRODHAN on September 12, 2012, 09:56:26 PM You may use a TRICK.
Make Fevicol SR covering on the model (Not very thick but continuous surface, Make foam with brush, Can use little water also, Apply 2 coat, one after another, same method). Then start painting with diluted Turpintine oil. Even thinner present as NC Lacquer diluater (very small but present) cannot ate the model. Try first on Scrap depron model/piece. This process needs little expertise but higher concentration. Take ample time for foaming. You even cover it with coloured Tape. Friction will be low. Can try fabric color too. Thanks Title: Re: Anybody have foam safe paint Post by: AEROVISHWA on September 12, 2012, 10:21:51 PM i too use the same enamel paint.... perfect...
check this... its done using enamel paint only.. http://www.rcindia.org/gas-glow-nitro-planes/quick-build-delta-!!/ Title: Re: Anybody have foam safe paint Post by: VC on September 12, 2012, 10:25:37 PM Smithraj - couldn't help noticing your signature - "Be a Patients-Work in progress-Success in yours." Care to explain what that means?
Title: Re: Anybody have foam safe paint Post by: rcpilotacro on September 12, 2012, 10:28:06 PM Smithraj - couldn't help noticing your signature - "Be a Patients-Work in progress-Success in yours." Care to explain what that means? he is talking about the nurse - VC ;) Title: Re: Anybody have foam safe paint Post by: VC on September 12, 2012, 10:59:09 PM You mean "work in progress with the nurse - be a patient"???
Rcpilotacro - first the bit about the Ball Bearings, now this. I fear that a stinker is on its way to both of us from Doha. I will quietly slink away into ignominy and no one will miss me. What about you? Moderator after all - control yourself and don't let yourself be swayed by a blackguard such as me. >:D |