|
Title: Atmel atmega flashing firmware tool Post by: Aeroempire on December 09, 2013, 02:42:33 PM I need at ek flashing tool, to flash simon firmware on my esc. Any RC outlets here in India.?
Or any other way to flash them. Title: Re: Atmel atmega flashing firmware tool Post by: saintofinternet on May 25, 2014, 07:59:27 AM robokits.co.in sells the AVR programmers
Title: Re: Atmel atmega flashing firmware tool Post by: bobbygh on May 25, 2014, 12:54:08 PM u can use this to flash esc and fc's almost all local lhs have them
http://www.sp4mm3r.com/flightcontroller/usbasp.html (http://www.sp4mm3r.com/flightcontroller/usbasp.html) rs 650 http://www.rcelectro.com/usbasp-avr-programming-device-for-atmel-proccessors (http://www.rcelectro.com/usbasp-avr-programming-device-for-atmel-proccessors) rs-450 (present out of stock) Title: Re: Atmel atmega flashing firmware tool Post by: saintofinternet on May 25, 2014, 01:09:46 PM i just reflashed my controller today morning and now its running 9xr
Title: Re: Atmel atmega flashing firmware tool Post by: lastRites on May 25, 2014, 08:46:57 PM You need an USBASP programmer. Most tutorials will be explained using this particular programmer. Most Indian robot shops tend to overcharge for a MCU programmer. You should get it within 500 from ebay. I got mine for 250 bucks locally..
Title: Re: Atmel atmega flashing firmware tool Post by: girishsarwal on May 26, 2014, 11:19:15 AM :iagree: with Trishit.
This might help. I use the same http://store.extremeelectronics.co.in/USB-AVR-Programmer-v2.1.html (http://store.extremeelectronics.co.in/USB-AVR-Programmer-v2.1.html) And a lot of free help and advise from the tutorials is complimentary |