@jayantpradhan: for Extra 300S wing span was ~1 meter and was flying pretty good.
@Jatayu : I'm just a bit confused why is pre cut depron components are for advanced users.
Where as I did the same thing by making Extra 300S. I bought depron>printed of extra 300s plan>cut>hot glued>added electronics and flew it.
1st flight i crashed within 20sec, it got damaged but i mended it within 30-40 mins,
After i got simulator, flown few planes on simulator for a week or so and I was good to go.
Electronics I used,
30amp ESC, 1300KV brushless, 8x6 SF(used), 6x4 E(for testing), 5x5(for testing), 3c 2200mah and 2c 1100mah, Fly Sky 6 channel 2.4 GHz Transmitter and Receiver, 9gms and 5gms servos.
P.S.: Yups two days holiday
But RC is one of the hobby which I just entered, I do Photography, Fish keeping, Trekking... Hope you understand why I'm looking for pre cut.....