|
Title: Does anybody can make this PCB. Post by: SORAV on July 30, 2015, 06:45:48 PM Dear All,
I want this PCB to get the normal GPS pucks to work with the Dji naza Fc.Kindly help me to get this done. Url for the same is as under. the files are in .BRD format. https://oshpark.com/shared_projects/Ehm2RZPY Regards, Sorav Title: Re: Does anybody can make this PCB. Post by: a3ruz on July 30, 2015, 07:22:12 PM Sorav .. that link contains a tab to order the product . Why can't you try that ?
Title: Re: Does anybody can make this PCB. Post by: akshay550 on July 30, 2015, 07:35:33 PM i cant open the link
Title: Re: Does anybody can make this PCB. Post by: akshay550 on July 30, 2015, 07:36:44 PM yes it can be done at home , no worries.
Title: Re: Does anybody can make this PCB. Post by: a3ruz on July 30, 2015, 07:40:08 PM akshay550 . agree with you the brd file is also available there
https://644db4de3505c40a0444-327723bce298e3ff5813fb42baeefbaa.ssl.cf1.rackcdn.com/uploads/project/design/Ehm2RZPY/design.brd Title: Re: Does anybody can make this PCB. Post by: akshay550 on July 30, 2015, 08:08:52 PM ya , it would be on a costly side too, time consuming, drill required etc... generally, you can order n wait than to build it. unless you are building it in batch.
Title: Re: Does anybody can make this PCB. Post by: Himadri Roy on July 30, 2015, 08:16:48 PM SORAV try seeedstudio.com (copy paste it in address bar). quite cheap but minimum you have to order 5.
Try ordering 15....you might get 5 extras :P! It happened to be quite a lot of time! :D Title: Re: Does anybody can make this PCB. Post by: SORAV on July 30, 2015, 08:18:40 PM @ i completely agree with you. But how much it would cost for 10 pcb. 2 i will make for my testing purpose & rest i will distribute amoung you guys for testing @ a nominal price.
Title: Re: Does anybody can make this PCB. Post by: Himadri Roy on July 30, 2015, 08:51:03 PM put in your requirements here and you'll get the cost
http://www.seeedstudio.com/service/index.php?r=pcb Title: Re: Does anybody can make this PCB. Post by: akshay550 on July 30, 2015, 08:58:57 PM yes that is better one, any other wesite available?
Title: Re: Does anybody can make this PCB. Post by: ujjwaana on July 31, 2015, 02:11:18 PM Double Sided , and that too SMD PCBs are hard to make at home. I have been making PCBs for electronics and HAM since my school days using Silk Screen methods. Though today much straightforward methods like Ink Transfer and even Direct Photo-Resist for PCB exist, aligning two sides of double sided PCB for laying out the track is pretty trick. I would suggest to buy the PCB instead or use Bread board and put the components on that.
You can now buy 3rd party NAza compatible GPS , instead of going for all these Gimmick. http://www.ebay.com/itm/251984073270?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649 Title: Re: Does anybody can make this PCB. Post by: SORAV on July 31, 2015, 05:06:30 PM @ ujjwal, Sir I know it is difficult to etch a 2 layer board but I thought that some body might have an access to the local pcb makers and it is better to ask first and then search for the offshore vendors .Anyway's I have ordered three PCB's ;D.
As far as the the compatible gps are concerned ,I am aware of those available at Ali-express @29$.But thought of giving a try to the DIY adapter as it allows normal neo 6/6N to connect directly to the Fc. No-more need to buy compatible or the original naza GPS. My thinking. |