HI ALL
Anyone having anything like the one shown in pic  
If anyone is selling this please PM me
thanx

Once you get them, I am your first customer!

You can use a GWS SF prop, make the loop out of steel wire and glue it using a drop of epoxy.
If you are very critical about weight of the prop,  cut down the extra hub on both side of the prop. To reduce more weight just sand it down with sand paper. Wont be as good as the kind of prop you have posted pictures of but it wont be that bad either and should do the job.

i remember buying 2-3 props for my rubberband plane from shorty's....pretty expensive but

Hi SunLikeStar
Thanks for your reply,I am more interested in the thing which is behind prop, I have tried what you have suggested, but the rubber band force is not letting the prop to rotate.I hope yo got my point.

I am also interested to purchase those props. I have to make my own prop using various materials in absence of those. Prop adapters can be easily made by wood (I use Icecream stick & CA, you can use Balsa), wore twisting with plastic bead and two tin piece to make low friction bearings.
Sharing a few photos of my album of rubber powered models as there is no scope to upload good quality photo in this forum. All photo here should be <192kB. please forgive me for external link.
http://www.facebook.com/media/set/?set=a.212124972136430.66603.100000167863676&l=2b4cf703ac&type=1

and
http://www.facebook.com/media/set/?set=a.212122895469971.66601.100000167863676&l=f776b8bca7&type=1

Thanks

Nice build Kalyan. What is the material used for the translucent white film in the first link and where did you buy them? what is the weight of the film?

Thank you for the suggestion KALYAN I will try it, and nice built

Sundar Sir,

This is regular Carrybag plastic and comes free. But I have purchased a pack to avoid dent and same dencity everywhere. But the model have several drawback. as the bamboo stick part I used gone bended, it lost level and reinforcement support is necessary I felt. Again, if bamboo is replaced with wood, it can be very rigid but become some heavy like later model. Prop also made with wood (Icecream Stick filing) and got nice performance but the prop pitch and dia have to be enlarged to get good flight-time.

Thanks for Inspiration.

I thought as much. Nice idea. I think I will also try the same

Hi,
I have these (see attached images) if you are interested please PM me the black one is  275 per piece & white one is  325    per piece

hi frifly
yes i  am interested, are the rates negotiable

At 325 you will get the entire plane...............

Hi sandeepm ,send me the plane with these kind of assembly , i will give you 5 rupees extra.

Sorry Dude,
i am not into business, you can get these plane kits from hobby ideas next to Mahalaxmi temple.....price range at 240 to 450.
here is what i have with me...