|
Title: FTDI to USB cable for minimosd programming Post by: arun21 on December 13, 2014, 10:56:05 PM Wanted : FTDI to USB cable for minimosd programming
Title: Re: FTDI to USB cable for minimosd programming Post by: santhosh-r on December 14, 2014, 08:23:53 AM You can get a USB-Serial converter from http://probots.co.in/index.php?main_page=product_info&cPath=67_88&products_id=411 (http://probots.co.in/index.php?main_page=product_info&cPath=67_88&products_id=411)
https://www.fabtolab.com/arduino-usb-serial-converter?search=FTDI (https://www.fabtolab.com/arduino-usb-serial-converter?search=FTDI) https://www.fabtolab.com/ch340-serial-converter-usb-to-ttl-6pin-module?search=serial (https://www.fabtolab.com/ch340-serial-converter-usb-to-ttl-6pin-module?search=serial) https://www.fabtolab.com/cp2102-usb-ttl-converter-6-pin (https://www.fabtolab.com/cp2102-usb-ttl-converter-6-pin) Title: Re: FTDI to USB cable for minimosd programming Post by: sooraj.palakkad on December 14, 2014, 09:03:20 AM If you have an arduino board, you can use it's a USB to UART converter for programming your minimOSD.
You just have use the Rx, Tx ,Reset, Vcc, GND pins to connect to your programming pins on minimOSD. A detailed how to is written by Oscar Liang : http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB4QFjAA&url=http%3A%2F%2Fblog.oscarliang.net%2Fprogram-minimosd-using-arduino-without-ftdi-cable%2F&ei=XwONVMHqBNGiuQTww4GwDg&usg=AFQjCNFWTicHf81jRZk2borHbKk2rO1vfA&sig2=Gov9hi6UPoUjaovDYnF5HA (http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB4QFjAA&url=http%3A%2F%2Fblog.oscarliang.net%2Fprogram-minimosd-using-arduino-without-ftdi-cable%2F&ei=XwONVMHqBNGiuQTww4GwDg&usg=AFQjCNFWTicHf81jRZk2borHbKk2rO1vfA&sig2=Gov9hi6UPoUjaovDYnF5HA) |