|
Title: I want a good servo tester/3.5mm bullet connectors Post by: RCNeil21 on June 17, 2013, 08:06:54 PM Hey guys i wanted a good cheap servo tester which can test atleast 2 servos at a time :) if anyone wants to sell please tell ;D.
Also if you have 3.5mm bullet connectors to sell i would like to buy 3 pairs ;D Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: Shannon on June 17, 2013, 08:43:33 PM neil wat r u building
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: RCNeil21 on June 17, 2013, 08:52:10 PM the slowly and blu baby, it will be a 2 in 1 so same power system will be used on both something like the FT swappable, both will have Almost same AUW and WS(300-400gms and 36-40") will be completing as soon as possible. This is also a way which i want to show for beginners to start cheap lower than 5000 :Rs: for two planes of 2 channels :) including everything charger,battery,Rx/tx :). But i dont know if they can buy what i bought at same prices as i bought it from an awesome person ;D.
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: Shannon on June 17, 2013, 08:55:48 PM haha ok for a 36 -40 i hope u got a really powerfull motor or u seen what happens at kharghar :giggle: :giggle: :giggle:
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: RCNeil21 on June 17, 2013, 09:11:42 PM An emax 2812 with 7060 prop with 3s should be fine right? if the AUW is 300gm then i can do some 3D with slowly, will give your 450 some slow competition ;D ;D ;D.
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: Shannon on June 17, 2013, 09:13:51 PM lol ok u can also do so lol lvl ripping with the slowly :giggle: :giggle:
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: RCNeil21 on June 17, 2013, 09:17:32 PM .
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: RCNeil21 on June 17, 2013, 09:47:09 PM Does anyone have these? and wish to sell them?
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: iamahuman on June 17, 2013, 10:01:36 PM Don't bump your thread repeatedly. Bump once a day or if the thread falls off the first page of the board.
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: RCNeil21 on June 19, 2013, 06:37:27 PM Bump
Title: Re: I want a good servo tester/3.5mm bullet connectors Post by: RCNeil21 on June 20, 2013, 12:38:00 PM Anyone has this?
|