|
Title: Looking for a Quad frame giveaway... Post by: amrahstihom on October 05, 2015, 08:34:09 PM Hey guys, i am a hobbyist....although in pretty bad financial status ... managed to get 4 dys esc+motors+ two pairs of propellers from college fund with a fs-ct6b radio controller. managed myself to get somehow an arduino mega with shield and mpu 6050......now looking for a giveaway or donation of frame and kk v2.1 fc although i am working on arduino to make own multicontroller using multiwii source and really really in need of a frame..... plz help me if you can :) :hatsoff: :) :bow:
Title: Re: Looking for a Quad frame giveaway... Post by: rastsaurabh on October 06, 2015, 03:12:45 PM make one by 2 wooden sticks and a small 4x4 inch thin ply simple.
a carpenter should not charge more than 200 rs. Title: Re: Looking for a Quad frame giveaway... Post by: meet2ami on October 06, 2015, 03:27:24 PM Ya...try to make a simple frame from plywood or board, some aluminium or wooden tubes. I also started with selfmade frames from junk stuffs like pieces of plywoods, CD boxes, aluminium pipes etc. Just try to do some DIY.
Title: Re: Looking for a Quad frame giveaway... Post by: amrahstihom on October 06, 2015, 03:58:26 PM Last time i did tried to make a frame not single one 5 times...and the 5th one i did managed to fly it participated in a competition and did won...but now i am looking for a better base for quad...last time it weighed around 1.5kg and burnt the fc and sensors in flight due to some fault in wiring .
Title: Re: Looking for a Quad frame giveaway... Post by: meet2ami on October 06, 2015, 04:45:39 PM Well that is good! But to be honest, to get a better frame, you have to spend some money! I really doubt anyone here has a good quad frame lying around and willing to giveaway! What size frame are you looking for btw?
Title: Re: Looking for a Quad frame giveaway... Post by: niteenk on October 06, 2015, 06:06:51 PM You can bid on ebay and could get this in less money
http://www.ebay.com/sch/Radio-Control-Control-Line-/2562/i.html?_from=R40&_nkw=zmr250&_sop=15 Title: Re: Looking for a Quad frame giveaway... Post by: mohammadadam on October 06, 2015, 08:35:36 PM btw if ur looking for props of 5030, try banggood..., u can get each at 1 :Rs:
Title: Re: Looking for a Quad frame giveaway... Post by: Darshan for multirotors on October 06, 2015, 09:12:04 PM Mohammadadam shipping from bang good takes a lot of time but if you have "that" tight budget then patience should be the key to your problem and as others say, for the frame just DIY
Title: Re: Looking for a Quad frame giveaway... Post by: saikat on October 06, 2015, 10:58:21 PM lack of a frame should not hold you back . they are the easiest part of a quad to scratch
build with readily available materials. http://flitetest.com/articles/H_Quad_Scratch_Build check out the above link for an example Title: Re: Looking for a Quad frame giveaway... Post by: jovino on October 07, 2015, 01:47:17 AM hy buddy i have a used frame ...... 600mm .... i had mounted all the components on the frame ... but now i removed it ... .... .. i still have the frame ..... x525 ...... ... contact me personlly if u need
Title: Re: Looking for a Quad frame giveaway... Post by: mohammadadam on October 07, 2015, 08:19:48 AM Mohammadadam shipping from bang good takes a lot of time but if you have "that" tight budget then patience should be the key to your problem and as others say, for the frame just DIY precisely said, patience is indeed the key |