Hi,

it seems that LHSs underestimated the requirements of us as most of low cost Motors, ESC's, Txs are zero in stocks. As starters have low budget initially (not actually, but to test on), low cost ESCs, motors like sub 500 are not present. Moreover, cheap DC Motors have scarcity here (Coreless Motors costs less 100 with ample power/weight ratio). SMD components are becoming popular but spares are not available. SAI's EDP50 gone out of stock.

  And now I am in need of 25A/30A ESC cost < 500 inc. shipping.

Some extra stock motors are coming now. So I am asking for ESC.

Please post if you have spare or extra or used one that you can give in that price. Not hard fixed 500, but costly DTDC/Blue dart takes most of the price as shipping charge. You may use EMS less than 50/- for me and with tracking facility.

LHSs Can you help please

Kalyan Da.. Are you planning some big bird?

No,
For big bird, I need almost 5K for motor+ESC+Battery Setup, and will not invest right now.
But will do that with Coro and wooden frame after lots of practice (Possibly in next Winter-Spring). And more, I am within 3km of Chalkmir (WPO, Eastern Region), So planning big bird and range in planning to test in my next posting. But, the Rrrr.. sound missing in BLMotors specially required for for large bird and smoker too. What do you think ?

Presently, I have some motors, and planes(Coro built) but cannot test due to lack of ESC.
Fokker Triplane(Dr. 1), Corsair, see-Duck Pusher(C-82) and any one biplane (Wright Brother's Plane ?) is in Queue need ESC's to operate them.

Thanks.

Kalyan..its too happy and inspiring to hear about your efforts in new planes..especially, about Wright's plane..and willing to share my own experience here to you..was purchasing some nice ESCs for my modeling projects..was most of them, within rs 500/-. but as concerned about some heavy use, i purchased some costlier high rated ESC, and found not working nicely..so i unwrapped it one..and found shocking..each and every thing was same, to the low cost ESC, but only difference was the wires, towards motor..it was some thick wires..

Krishna,

I know, the hardware are almost same. If you deeply look into, you will find the difference in soldering materials too (Ag-Cu solder insted of Pb-Sn Solder). The main difference lies between the Phase angle sensing (Torque Angle truly) sub-routine and over-current cut-off residing inside uC.

All my current models are 3mm coro built and 24-36 inch wingspan.

However thanks.

Kalyan Da, why don't you write a book on Electronics for Engineering students. 

yes..Kalyan..if it was some thing like that, it was some relief..but the only difference was, the heavy heat sink with fins..
please give some details of your Corsair, when finished..it will be too nice to see..thank you..

oye .. i am a lot impressed by u bunch of fellows ...

.... kindly upload videos of ur custom projects and motivate young fellows...