|
Title: Need balsa Post by: taksh on July 07, 2018, 02:25:21 PM I need balsa
Anyone selling balsa? then give a reply or pm me Where i can get balsa? please suggest website. Thanks. Title: Re: Need balsa Post by: KARTHIC RAJA on July 07, 2018, 09:44:59 PM There are many RC WEBSITES selling balsa, in that Rc bazaar is one;
Title: Re: Need balsa Post by: K K Iyer on July 07, 2018, 09:49:44 PM ASKING is easier than SEARCHING
Title: Re: Need balsa Post by: K K Iyer on July 07, 2018, 10:06:40 PM @taksh
In your PM you asked me Balsa is necessary for 30 seconds minute HLG? No. Not necessary. Depron, glass fibre and carbon fibre are equally suitable. Balsa is probably the cheapest and easiest to work with. And probably easier to get than light glass fibre and thin epoxy finishing resin. Title: Re: Need balsa Post by: taksh on July 07, 2018, 10:24:13 PM @Khartik Raja
I know Rc bazaar is selling balsa but if i can get low price on other website then i can do other things with my budget. Title: Re: Need balsa Post by: K K Iyer on July 07, 2018, 11:01:01 PM https://www.aeromodelindia.com/product/balsa-sheet-3/
Title: Re: Need balsa Post by: K K Iyer on July 07, 2018, 11:12:08 PM @taksh
Pl indicate size and quantity of balsa that you need. Usual size is 10cm x 100cm, ie, 4x40, or 3 x 36 Title: Re: Need balsa Post by: KALYANPRODHAN on July 08, 2018, 10:41:26 PM taksh,
Always search the materials where it is used, alternatively. Balsa is used in architecture modeling. So search in stores, in front of engg. college, where architecture is studied... surely you get it cheaper. It is also used in boats... Title: Re: Need balsa Post by: K K Iyer on July 09, 2018, 12:53:36 PM @taksh,
I need to buy balsa for HLG but i don't know about thickness. 2mm balsa will work? I want to throw plane using wings 1.5mm or 2mm is ok for 9-12 span wing, or 3mm for ~15. Same sheet can be sanded down to about 1-1.5mm thickness for tailplane and fin. 2-3 layers can be joined to get 5-6mm thickness for fuselage. Title: Re: Need balsa Post by: prabu85 on July 14, 2018, 06:56:50 AM Superflyhobby.com
Sent from my XT1068 using Tapatalk |