RC India

RC Baazar => Wanted => Topic started by: Shyam Hembram on February 19, 2015, 05:50:47 AM

Title: need extended arms forDJI F550 frame
Post by: Shyam Hembram on February 19, 2015, 05:50:47 AM

I need extended arms for DJI F550 frame,want to build a hexacopter to spin 13inch prop,contact me if anyone has it or any LHS

Title: Re: need extended arms forDJI F550 frame
Post by: teamnamibia on February 22, 2015, 07:43:18 PM

extended arms? what size is that?

Title: Re: need extended arms forDJI F550 frame
Post by: teamnamibia on February 22, 2015, 07:43:56 PM

I have the following frame

Title: Re: need extended arms forDJI F550 frame
Post by: Shyam Hembram on February 22, 2015, 08:16:48 PM

can you say how much is the distance between adjacent motors???

Title: Re: need extended arms forDJI F550 frame
Post by: teamnamibia on February 25, 2015, 12:52:11 AM

On the hex it is 550 mm, I doubt 13 inch props will fit though.

Title: Re: need extended arms forDJI F550 frame
Post by: akhilzid on February 25, 2015, 01:07:02 AM

if i remember correctly, the stock frame have approx 10.5 inches distance between one motor shaft to nearest motor shaft so you cant use more than 10 inch props with stock.

Title: Re: need extended arms forDJI F550 frame
Post by: teamnamibia on February 25, 2015, 01:08:58 AM

yep Akhilzid, I never got to measure, was busy trying to draw a rough figure on solidworks to see if 13 inch would fit( i work with imperial units so not all too simple) :-D

Title: Re: need extended arms forDJI F550 frame
Post by: akhilzid on February 25, 2015, 01:24:53 AM

just 8th std maths is enough ;).

exactly 275mm(10.8268 inch)

Title: Re: need extended arms forDJI F550 frame
Post by: teamnamibia on February 25, 2015, 01:28:45 AM

:banghead: going for a refund of all the school fees i have paid from 8th standard till date.

Title: Re: need extended arms forDJI F550 frame
Post by: Shyam Hembram on February 25, 2015, 01:36:10 AM

but i saw some other methods to mount 13inch prop,mounting spacers over motors so the props overlap eact other without touching.!this can be done.but i doubt its stability

Title: Re: need extended arms forDJI F550 frame
Post by: gunnu on February 25, 2015, 01:39:39 AM

Quote from: teamnamibia on February 25, 2015, 01:28:45 AM

:banghead: going for a refund of all the school fees i have paid from 8th standard till date.

:rofl:

Title: Re: need extended arms forDJI F550 frame
Post by: Jash Yang on February 25, 2015, 09:25:20 AM