Title: Need Help foe setting up FPV 5.2 ghz Post by: heliboycochin on January 25, 2013, 01:01:34 PM Hai
i have recive my 5.2 ghz 200 mv Video tx n rx Pls any body can help me how to setup with my hexacoptor In Tx How much Power i shuld give And shall i use any ectra Liop on hexa for Video TX ? and also i need to setup a ground station i also have 7" lcd monitor and 11.1 v 3c lipo for monitor and shall i can give power to Video Rx frm same battery to power up rx ?? pls guide me inset by setup to setup i have extra sony fpv camera also and gopro 3 :) Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: deepakkshr on January 25, 2013, 01:20:07 PM please provide some more details. where you got ? link. so that we can help you
Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: heliboycochin on January 25, 2013, 01:25:14 PM Hobbyking
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=15295 Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: satyagupta on January 25, 2013, 02:30:03 PM something similar:
https://www.youtube.com/watch?v=UMC3DPl3GQ4 https://www.youtube.com/watch?v=TOVi86f6bvE Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: deepakkshr on January 26, 2013, 01:33:09 PM Hello
http://www.hobbyking.com/hobbyking/store/uploads/123148712X274852X8.pdf http://www.hobbyking.com/hobbyking/store/uploads/230577007X52655X30.jpg Try these for wiring setup and see if it works Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: heliboycochin on January 26, 2013, 02:17:30 PM thanks very much :hatsoff:
Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: deepakkshr on January 26, 2013, 02:43:42 PM most welcome :)
Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: heliboycochin on January 28, 2013, 02:17:57 PM What about power setup on coptor .. for transmiter video ?? shall i need extra 7.2 v lipo shuld buy ?
iam using to fly my hexa is 11.1v 3c 5000 mah battery so shall i put extra battery for that ??? video transmiter volt showing 7.2 v Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: satyagupta on January 28, 2013, 04:27:29 PM 3s will also do, and 5000 mah has lots of power so no need of extra battery just for tx. Do keep your vtx in such a way that air flows around it, i have read a lot that it tends to get hot a lot.
Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: heliboycochin on January 28, 2013, 04:47:54 PM sir it need only 7.2 v
so how to give such volt from 11.1 v lipo ? so i think can i put 7.2 v lipo extra ? Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: satyagupta on January 28, 2013, 05:41:45 PM Every electronic equipment has an operating voltage range, if you check the HK link of the FPV tx and rx you will find this line
Quote Transmitter operating voltage: 7~15VDC / 150mA So 7V is the min operating voltage which ranges to 15V so you can use 3S to power your tx without any problem :thumbsup: Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: heliboycochin on January 29, 2013, 10:51:50 AM Thanks Sir
Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: heliboycochin on January 29, 2013, 02:47:29 PM DONE ALLL....
SUCESS.. THANKS ALL ..VERY THANKS :hatsoff: :hatsoff: Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: satyagupta on January 29, 2013, 03:23:58 PM Great good please share logs or guides for other users it can be very help full for other novice users.
Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: deepakkshr on January 29, 2013, 07:59:59 PM :goodjob:
Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: pranavh on February 09, 2013, 12:02:08 AM Did you have any customs problem? I need a 5.8GHz set for my project, and it is time-critical.
Title: Re: Need Help foe setting up FPV 5.2 ghz Post by: murcielago on February 09, 2013, 09:09:35 AM Did you have any customs problem? I need a 5.8GHz set for my project, and it is time-critical. Indian Customs !...U never know..If it comes in ur time line then its "Luck by Chance" |