hi i brought an eagle wing, does anyone have an appropriate motor for this stuff.......

i found one in VKsingh's wesite, tried to contact him but no reply ,
 
PLS HELP ME<<<<<

Hello,
I have a motor for this model.

NTM Series 35-30A 1400kv / 560w
http://rchobbyaddict.com/product_info.php?cPath=53&products_id=124


Specifications:
Model: NTM Series 35-30A 1400kv
Kv: 1400rpm/v
Turns: 5
Max current: 41A
Max Power: 420W @ 12v (3S) / 560W @ 15v (4S)
Shaft: 4mm
Weight: 88.3g
ESC: 50A
Cell count: 3s~4s Lipoly
Front Mounting Hole Distance: 25mm or 19mm
Connection: 3.5mm Bullet-connector

warriornair please use a similar(kv) motor as of easystar. I hope inrunner may not fit to mount in eagle wing. Check the rctimers 2200kv motor.
Also I do not think it can take more than 7x4 prop. NTM motor could be heavy for this and would be perfect for Skywalker not eagle wing and check what thrust it gives for a 6x4 prop for 3S.

thank u anam, but i need a higher kv motor

@ foamy , thank u , i got the parcel today evening , was difficult bringing it home on my bike due to its size, all are in good condition, and thank u again for ur patients even in my delayed payment

Not a problem... Anytime...

 

hi, what about this motor

or this one http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13912

smbdy help

The first one with 2200 KV is the suitable choice. The second one 2000 KV though also suitable, I am not sure about the hub which is protruding at the mounting base, if it is rotating type or in any case you may have to drill a hole to accommodate without fouling in the supplied ply mount. Further I think the motor suggested  by Anam has the shaft coming out from other direction which will be difficult to mount with the provided Ply Mount, because shaft will go in to the foam rather than coming out side.

thank u sundaram....

,

he is out of town , i went to him and took one motor for me ,you should wait as he has a stock now.

thanks vineet, i woundered why he was not responding