Title: Need Second hand Equipments Post by: viraj on February 10, 2011, 03:48:02 PM hi Guys
I am making a my own RC Plane at home using a 12mm Bio Foam. I am almost finished with my cut out and pasting .. now the real part is keeping me blocked. Looking out for second hand 1) 1400 Kv Outrunner Brushless Motor 2) 25 - 30 ESC 3) 3 Nos 9Gram servos 4) Tx & Rx Please let me know where can i get stuff which is already been used as I am falling short of money This is my first time making a RC plane.. PLEASE HELP !!!!!!!!!!! Title: Re: Need Second hand Equipments Post by: abhay on February 10, 2011, 05:44:16 PM hello viraj
please check the "for sale" section for previous 10-15 days u will find esc and motors. as far as servos are considered, u can order from vivek. he gives for INR190/ each. Tx rx u can get in around 4000 for a non reputed brands like Fly-Sky and all.they work nice. If u need a branded one then u can make a specific post. but none is going to give it below 3500-4000 bugs for a used one too for 4-6 channel. Regards, Abhay Title: Re: Need Second hand Equipments Post by: viraj on February 10, 2011, 06:26:30 PM Thanks a lot for the information abhay..
could u please let know where can i get in touch with Vivek as I am very much new to this site .. its my first day of post. Can he also provide Tx & Rx ?? Regards Viraj Title: Re: Need Second hand Equipments Post by: rohitgupta322 on February 10, 2011, 07:48:25 PM For motor, radio and other electronics(if u are on a low budget and don't want to spend on costly products): plz visit www.rcelectro.com(does not sell radio), www.rcforall.co.in, www.flying--rc.blogspot.com(u can buy the HK 6ch TX/RX for around 3.5k from here).
P.S:- U won't get it second hand from these websites. Title: Re: Need Second hand Equipments Post by: abhay on February 11, 2011, 01:24:48 AM Yes viraj, u can contact vivek through rcelectro.com, he is the owner.I will PM his contact no.if u want.I must be having i think.ill check it out tomorrow..
as per rohit, u can contact mr sai on www.rcforall.co.in. Title: Re: Need Second hand Equipments Post by: jagjit on February 11, 2011, 02:40:59 AM Hey Viraj, where did u get the material to make a plane on your own, share it, it woul be helpful to a lot of other folks also
Title: Re: Need Second hand Equipments Post by: viraj on February 11, 2011, 10:53:16 AM Hi
I am making my Sport Trainer with a 12mm Bio Foam, I purchased it From Pune (from Raviwar Peth - Kings Paper) Each Sheet will cost you INR 120/- and 1 sheet is sufficient. To strengthen it I have used Kebbab Sticks and. I am also looking for Airelon Servo Connectors, Can somebody tell me where can i Get it. I think should be a triangle kind of shape. Title: Re: Need Second hand Equipments Post by: akky on February 11, 2011, 11:06:36 AM how long y cable do u want
Title: Re: Need Second hand Equipments Post by: viraj on February 11, 2011, 02:42:33 PM what is Y cable . can u post some pic ??
Title: Re: Need Second hand Equipments Post by: SunLikeStar on February 11, 2011, 02:46:13 PM http://www.hobbycity.com/hobbycity/store/uh_viewitem.asp?idproduct=9908
Title: Re: Need Second hand Equipments Post by: viraj on February 11, 2011, 04:10:45 PM what is servo Y cable and for what purpose do we use it ??
Title: Re: Need Second hand Equipments Post by: SunLikeStar on February 11, 2011, 04:19:50 PM Y servo lead is used to connect two servos on the same channel of your receiver, for example you might want to use two servos for ailerons (one for each).
Title: Re: Need Second hand Equipments Post by: viraj on February 11, 2011, 04:27:47 PM thanks a lot "star" for the information.. will surely get back to you..
once i am done with the pasting work.. i am already half done with it.. will post the pics soon.. where do u fly in pune ?? |