|
Title: Needed - heat shrink tubing Post by: tg on August 28, 2009, 11:20:24 AM Does any one know of shops in bangalore selling heat shrink tubing and what is the cost??
Title: Re: Needed - heat shrink tubing Post by: RotorZone on August 28, 2009, 12:54:58 PM The shops that sell wires in SP rd sell these too. There are 4 or 5 such shops there. Cost increases with size. Don't recall cost exactly it should be approx 25Rs/m for 15mm wide stuff.
Title: Re: Needed - heat shrink tubing Post by: saurabhhsrivastavaa on August 28, 2009, 07:58:22 PM Here you go...
http://cgi.ebay.in/HEAT-SHRINK-TUBES_W0QQitemZ150366497685QQcmdZViewItemQQptZLH_DefaultDomain_203?hash=item23028aab95&_trksid=p4634.c0.m14.l1262 Title: Re: Needed - heat shrink tubing Post by: gauravag on February 03, 2010, 02:22:02 PM So are these heat shrink tubes available locally ? I need to solder new XT60 connectors on my battery pack and ESC and would like to use these, if available.
Title: Re: Needed - heat shrink tubing Post by: anwar on February 03, 2010, 04:23:29 PM They are available in shops that sell electronic circuit parts (the resistor, capacitor, diode, etc items).
Title: Re: Needed - heat shrink tubing Post by: vinay on February 03, 2010, 04:30:17 PM The wire store in front of vishal electronics sells heatshrink. Amazingly it was of the same company that i got from HobCity. :giggle:
4 rs per meter for 3 to 4 mm. and for 45 mm i paid 90 bucks. you get all sizes. Title: Re: Needed - heat shrink tubing Post by: ujjwaana on February 04, 2010, 12:20:31 AM So are these heat shrink tubes available locally ? I need to solder new XT60 connectors on my battery pack and ESC and would like to use these, if available. As Vinay said, they are available with 'Cable Craft' (Mr Aditya -9886142155), opp Vishal electronics (a more knows landmark - ask for this shop to lead there). They sell all kind of wire, heat shrinks etc, the shop is unmissable as its marked with reams of rainbow colored wire. I got my heat shrink, 3 core 26AWG flat wire for servo and some Silicaon wiere (this was not of high quality). For XT60 connector, buy 4mm ones as it fits on them perfectly. I just Love XT60 the way they fit. no clumsy Deans/bullets unless i am going past 50A. Title: Re: Needed - heat shrink tubing Post by: vinay on February 04, 2010, 12:23:31 AM I just Love XT60 the way they fit. no clumsy Deans/bullets unless i am going past 50A. Now say thanks to me. ;) Title: Re: Needed - heat shrink tubing Post by: anwar on February 04, 2010, 01:24:36 AM Gaurav is in UP, and you guys are pointing to shops in Bangalore ? :headscratch:
Title: Re: Needed - heat shrink tubing Post by: ujjwaana on February 04, 2010, 02:04:35 AM Does any one know of shops in bangalore selling heat shrink tubing and what is the cost?? The reply is for TG .. not for the thread starter |