Title: Plastic replacement gears for Servo's Post by: teamnamibia on August 22, 2014, 04:19:45 PM I have collected alot of servo's over the years, most of them with broken gears on the inside, today i mixed up the gears to at least have half of them working(as it was not the same gear breaking on all of them). I would like to know where i can get gear sets to use for replacement, the most common servo i have is the GS-9650BB and i also have alot of the smaller Turnigy TG9e's. for the Turnigy i will try ordering a set of replacement gears from Ebay-India's hobby shop for testing the size, but if somebody could guide me to a place where i can get them for certain, i would highly appreciate it.
Thanks, Mike Title: Re: Plastic replacement gears for Servo's Post by: sanjayrai55 on August 24, 2014, 12:06:28 PM Hobby King
|