|
Title: Second Hand Simulator Post by: jagjit on February 15, 2011, 01:32:59 AM Hey All,
Anyone out there wants to sell their working Simulator (preferably Bangalore to prevent shipping). Don't wanna spend too much on it as it may not come to use after sometime. Jagjit Title: Re: Second Hand Simulator Post by: rcpilotacro on February 15, 2011, 07:31:21 AM If you have a radio , get a cable from sai, i can give you the software . pm
Title: Re: Second Hand Simulator Post by: Akshayb on February 15, 2011, 08:45:23 AM I suggest you to contact LHS from Bangalore who also sells easy stars.
All the Best Akshay Title: Re: Second Hand Simulator Post by: jagjit on February 15, 2011, 11:30:19 AM Do all radio's work like simulators? I found some provide a cable to program the radio (fly sky), can that work as simulator cable
Title: Re: Second Hand Simulator Post by: anwar on February 15, 2011, 11:54:38 AM Any radio with a trainer port should work with appropriate cables and sim software.
Title: Re: Second Hand Simulator Post by: Akshayb on February 15, 2011, 12:39:57 PM You require a radio-plug (Different for different radios) and U.S.B dongle to go in computer, that's also is programmed to interact with different SIMS, this dongle converts signal from Radio to a Signal which Sim can understand.
You should have decided on a radio or already have one before getting this. Or get one with multiple plugs. All the Best AkshayB Title: Re: Second Hand Simulator Post by: rcpilotacro on February 15, 2011, 01:47:14 PM to cut the long story short, which is the radio that you have ? incl futaba sky sport (ancient) can be connected to the PC and used as a sim,
This one caters for most pins except Futaba, which sai has again, call him up http://cgi.ebay.in/FLIGHT-SIMULATOR-FLY-SKY-CABLE-/150524319404?pt=LH_DefaultDomain_203&hash=item230bf2d6ac (445 Rs) I have connected using sai's cable, Futaba Sky sport, Futaba 7C 7 CAP, HK 6c, Skyartec, Turnigy 9c, all using different pins. Title: Re: Second Hand Simulator Post by: rcpilotacro on February 15, 2011, 01:48:15 PM PM me for software, for free
|