Title: standard servos Post by: Suyash on May 02, 2017, 02:25:22 PM hlo everyone,
i need 4 standard servos for an engine model.(32gm-40gm). preferably new or slightly used. please tell if someone have these servos or information. regards Title: Re: standard servos Post by: sanjayrai55 on May 02, 2017, 04:24:40 PM Most LHS sell them. Check rcdhamaka.com and aeromodelindia.com, sphere hobbies etc.
Title: Re: standard servos Post by: Suyash on May 02, 2017, 04:36:24 PM sir,
rcdhamaka have stock of only jr which are expensive and there is out of stock on aeromodelling india and spherehobbies. regards Title: Re: standard servos Post by: sanjayrai55 on May 02, 2017, 04:52:36 PM I've used these a fair bit, without any problems at all
https://hobbyking.com/en_us/hxt-5010-twin-bearing-digital-servo-6-9kg-0-16sec-39-2g.html Cheap also, delivery within 2-3 weeks I also use HiTec HS 311 - Servos more than 15 years old still working http://www.sumeetinstruments.com/shop/index.php?route=product/category&path=25_36 http://www.amazon.in/Sumeet-eShop-31311S-Hs-311-Standard-Universal/dp/B0006O3WVE?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=e77622f3-eddc-429f-85a9-4964e4ed60ab Title: Re: standard servos Post by: Suyash on May 02, 2017, 09:54:27 PM thank you so much sir
Title: Re: standard servos Post by: vishal on May 03, 2017, 12:24:27 AM rcbazaar has standard servos in stock...low price too
hobbyxyz.com also has low priced standard servos in stock Title: Re: standard servos Post by: sanjayrai55 on May 03, 2017, 09:54:29 AM Nice to know that hobbyxyz keeps HK 5010!
As far as RCB Servos go, I don't find them cheap at all. HiTec's HS 311 is a proven, branded Servo, among the most popular in the world, and is priced at Rs. 590 vs RCB Avionics 45 HB @ Rs. 710 Title: Re: standard servos Post by: Suyash on May 03, 2017, 10:46:33 AM yes sir, hobbyxyz keeps hxt5010 but currently they are out of stock. :giggle: now buying hitec hs311 servos.
regards Title: Re: standard servos Post by: yashb on January 02, 2018, 12:18:29 PM i have some futaba and hi-tec standard servos, I read your post in the wanted section
|