|
Title: Thunder Tiger F54S 4-stroke engine Post by: burntafterburner on May 29, 2019, 05:17:11 PM Looking for an used ( in any condition ) Thunder Tiger F54S 4-stroke engine.
Need it to harvest some parts. Actually looking for the Feather ( Woodruff ?) Key that locks the prop drive hub to the crankshaft. My one fell off while servicing my engine and I guess entered some black hole :) Title: Re: Thunder Tiger F54S 4-stroke engine Post by: sbajare on May 30, 2019, 10:17:38 AM Hi,
I too had lost my OS 90 Four stroke key, we managed to get one close to that dimension and then grinded sightly to fit. Just check the area where industrial hardware shops are located and ask for the half round key. regds Title: Re: Thunder Tiger F54S 4-stroke engine Post by: burntafterburner on May 30, 2019, 10:37:29 AM Thanks @sbajare.
That's a good idea. Mine is actually a feather key i.e rectangular with half rounds fore and aft in line with the crankshaft (Plan view looks like a bathtub). Shall look for the nearest larger size and then work with the grinder and a set of needle files. At least hopefully the steel will be of proper quality. Title: Re: Thunder Tiger F54S 4-stroke engine Post by: sbajare on May 30, 2019, 10:57:52 AM Hi,
should as shown in the pic below Title: Re: Thunder Tiger F54S 4-stroke engine Post by: burntafterburner on May 30, 2019, 03:30:12 PM My one looks like this
Title: Re: Thunder Tiger F54S 4-stroke engine Post by: unidrakeshrc on May 30, 2019, 06:49:40 PM @sbajare, Sir, Since I am also from Pune, may I know where u fly.
Regards Title: Re: Thunder Tiger F54S 4-stroke engine Post by: sbajare on May 31, 2019, 10:18:55 AM Hi,
We fly at Ramtekdi Industrial estate, near Jaws mfg. Pls whatsup on 9175342600. will send invite to join PAA group |