RC India

RC Baazar => Wanted => Topic started by: Devanesan Andrews on December 08, 2015, 12:18:46 PM



Title: used apple box Glider
Post by: Devanesan Andrews on December 08, 2015, 12:18:46 PM
ANY USED APPLE BOX GLIDER


Title: Re: used apple box Glider
Post by: sanjayrai55 on December 08, 2015, 12:26:04 PM
Just buy the kit and build one! Easy and fast build, will give valuable experience and insights

http://aeromodelsupermarket.com/radio-controlled-model-kit/45-r-c-glider-apple-box.html


Title: Re: used apple box Glider
Post by: shobhit17 on December 08, 2015, 01:07:51 PM
Take the valuable advice of the TIGER..... Sanjayrai Sir.....
The Kit costs just over 3500 or so and is extremely easy to build... all laser cut parts.


Title: Re: used apple box Glider
Post by: Devanesan Andrews on December 08, 2015, 01:19:08 PM
I am not a great builder of balsa sir... Thats my problem


Title: Re: used apple box Glider
Post by: sanjayrai55 on December 08, 2015, 01:22:07 PM
No better time or model to start then  :thumbsup:


Title: Re: used apple box Glider
Post by: sanjayrai55 on December 08, 2015, 01:24:08 PM
Also, if you build it, you will not find it difficult to repair (despite best intentions, accidents sometimes do occur......)  ;D


Title: Re: used apple box Glider
Post by: Devanesan Andrews on December 08, 2015, 01:34:01 PM
Fine sir... Then I all buy one from sharma


Title: Re: used apple box Glider
Post by: sanjayrai55 on December 08, 2015, 01:36:39 PM
You will find Mr. Vivek Sharma most helpful; any problems just phone him


Title: Re: used apple box Glider
Post by: Devanesan Andrews on December 08, 2015, 01:43:41 PM
Thank u sir


Title: Re: used apple box Glider
Post by: shobhit17 on December 08, 2015, 04:02:20 PM
Its an extremely easy to build model.  All you need is a drawing board on which you can spread the drawing and use it as the base to build your model.  Remember to cover it with a polythene sheet so that fevicol does not stick to your plan and you can use the same plan again. The other tolls required are a small hammer with a box of All pins (I use my pliers to put the pins in), a good stiff paper knife and a sanding block...... 

the rest can be managed easily...

Happy Flying