i need 3 v-tail mixers ,not sure if anybody out there is having or not  .thanks for reading.
.could've got from an LHS ,but want cheap on a very tight budget 

why don't u build your own ? cheaper for 60/- each

Sahil, please let us know how to build it.

Regards,

VC

tell me how to make one....

i m very curious to know and save my money  

guys u need to know a bit of electronics

http://www.indiarc.com/forum/index.php?topic=1517.msg20341#msg20341

http://ilufa.orgfree.com/MIXER_C.htm

Sahil -

Since it is your own thread, kindly repost the build information (cost, parts etc) here on RC India. We would like to build our information content independantly. Since the author is active here, it would add to the knowledge-base here.

Nothing wrong with the link, but why refer to something that is loosing significance and also forces people to get a rule book out before asking questions or seeking help.

Thank you Sahil for posting the DIY mixer details here :

http://www.rcindia.org/servos-gyros-and-all-electronics/diy-home-made-v-tail-mixer/

just wondering if anybody is having v-tail mixers to sell ..............w8in.....
cheers
pankaj

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6321
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=4170
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=4072

These were the results based on search on HobbyCity. Try going through all the products before finding a good one, Not sure if there are any other. Read all the specks before you buy. 

If you still want it cheaper, Build it yourself based on the link given by Anwar/Sahil.

pankaj send me some blank chips and i will program then n send it back to you (5 min job for me) but i don't whether you could be able to build rest of the circuit or your level in electronics

sahil

May I request you to build them completely for me, if I were to pay you in advance? Of course, if it doesn't impinge on your time. Please let me know.

Regards,

VC

yes i can do that but it will be a one time job, if anyone needs one let me know now !

i'm getting some free time soon, just pay for components n shipping

sahil

what will be the cost???
including flat rate all india shipping?

cost should be under 60/- plus what ever is the postage charges

sahil

give me 4 i'll pay u the charges
please pm me ur account details
will think 4 of them + shipping should be rs300[this is my price]

That is a good deal Sahil. Thank you very much. Will PM you.

Regards,

VC

wait don't be in a hurry,let all the guys say how many they want and i will go buy the component then mention per mixer cost !

PS: just post how many one wants here, so that i can keep track of the number  

and i will only ask for money after all the mixer's are ready to use

sahil

4 for me..                       

Pl check my PM, I have requested for 5 or 6 pcs - And you should despatch ONLY after my money is in your account.

Regards,

VC

sure VC !

guys the offer stands till February 23, on 24th i will buy the required components !

seems like everybody needs v-tail mixer
4 for me

Pankaj, all thanks to you. If you hadn't started this topic, we would have never benefitted from Sahil's expertise. Thanks again!

VC

just want to confirm ,if i can use these mixer (by sahil sir) in my quadrotor

or should i use the one available from sai sir(ebay)(650 rs+shipping)

mixing diagram attached

pankaj the one being sold by sai has only 1:1 mixing and the one i'm providing has 1:1, 0.5:1, 1:0.5 and 0.5:0.5 mixes selectable via small switch! with similar resolution !

i need 4 .
but i don't know how to pay as i m new   to forum ...

and are they compatible with futaba r136f (72mhz) reciever and which gyro should i use (planned to buy from sai sir )..

waiting for reply ..

(let's see if sahil sir can teach us how to make a gyro... )

so sahil sir today is 23 have you done purchasing ,and tell us your account details...

Hi Sahil,

I am also waiting for your account details, Please PM me the info..

Thank you,
Ramkumar G

mee too..

guys sorry been occupied, will post the details

waiting for sahil sir's reply....

today is 27th   

"guys sorry been occupied, will post the details"

Patience. He has already told us that he is busy. Let's not forget that Sahil is doing us a favour. This is not a part of his job. He will revert when he is ready.

Regards,

VC

hello VC sir,

i know but i am new to RC so having little patience ....

sorry if i m hurting someone...

chill out brother no need to say sorry or use the word sir 

okay here is the list of people who wanted a V-tail mixer !

                                       QTY
pankaj                                4   
VC                                    5-6
ankurgr8on                          4
atul_pg                               4
ramjin82                              3

total of 20 units right 

tomorrow i will post an updated build log of the actual version i will be building for you guys!

sahil

"no need to ______ use the word sir" Thanks!

Yes, mark me up for 5 or 6 as per your convenience - I confirm.

Regards,

VC

ha thanks .....
4 for me ...roger 

guys ordered the parts should have them by Tuesday!, now the black plastic housing has to be provided by the buyers as i don't have then, i will include similar unit but one has to trimmed the plastic to fit there particular receiver (by the user) or switch the once from servos to the V-tail mixer and use the one i sent for the servos! or buy yourself some servo replacements cables !

Wonderful! What about your bank details for remitting payment?

Regards,

VC

so you are fine with the black plastic casing ? if u guys conform then i will go a head and build the stuff !

i think without casing it will be ok

jus need plugs(3 pin) to put in the rx

as in the given picture

yes the gold flashed pins will be included, okay then pankaj you should be getting your stuff soon and will send details of payment once ready for shipment 

i m too happy and actually i wanted it without casing as it will be lighter then and i being into micro want so

When do I get my set?

sahil sir plz pm me bank details...

or call 09037536410

Sahil,

That is really a wonderful fabrication DIY 'V' tail Mixer 

Just my bad luck I missed out on your orders. I will try to fabricate some for me now on my own. please I will ask you for assistance if I come across hurdels.

Though I have copied the circuit diagram from your posts. Do you by any chance made the PCB plan in any PCB designing software then please give me the plan please. It saves me lot of trouble of redesigning it. If no then no issues I will design it myself.

Where did you buy the components. Being in Jhansi I have much restricted access to them. I may have to send some one to Delhi.

sure what ever help u need from me, i don't have a PCB design just building on general purpose PCB (only 3 components)
if u can handle the construction (which u can) i can send u some programmed chips!

PS: if you want a PCB layout i can make one!

sahil

guys please PM me respective shipping address so that i can find out the shipping cost as well as give the final cost!

only PM no posting on the forum (address)

send u  a pm please check it

thanks ankur got the details and VC has also sent his details, i will be visting the courier guy near to me DTDC

and find out the shipping cost then i will send the details to respective members !

till then if other could also send me there details it would be great !

Edit: atul and pankaj have sent there details

discussion continued here   

http://www.rcindia.org/servos-gyros-and-all-electronics/diy-home-made-v-tail-mixer/

cost of each mixer will be 58.60/- plus shipping

update, shipping charges will be 70/- DTDC (per member)! time various from 2 to 3 days (arrival) will updates u guys tomorrow morning and the stuff will be shipped on 19th of this month! i just send a small package to pune

let me see how it goes!

sahil

update, payment details have been sent and the package i sent to my friend in Pune received it today afternoon (shipped on 13th April received on 16th April) ! so there transit timing seems to be okay 

sahil

Hooray! My V tail mixers just arrived. Sahil, thanks a ton! I wish there were more people like you who were willing to go out of their way to help others.

Regards,

VC

thanks VC and guys please leave a feed back once you get the stuff !

sahil

Sahil - Actions like yours set a fine example for participation in this hobby. 

It is a privilege to be in the company of people like you Hope to be on the field with you some time in my life