|
Title: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: antojk on December 12, 2009, 04:26:15 AM Broke my original TX unit for Carson Airbeast RTF heli, The unit is rudimentary 4 Channel 35 MHZ unit. Please PM me or mail me antojk@gmail.com
Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: anwar on December 12, 2009, 11:54:21 AM Had never head of the Carson brand of simple helis. Every website on the subject seems to be in German etc
If this is on 35Mhz, what channel is it under ? I could not find a way to verify that it uses regular PPM either, but most likely it does. Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: antojk on December 24, 2009, 03:16:39 PM It is a 35 MHZ PPM system, much like the Esky 0404 TX. Who knows may be the same internal board.
Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: anwar on December 24, 2009, 03:25:29 PM I think your easiest option, if you are getting into RC for the longer term, is to get a standard TX and RX, and use those in the heli. Of course, this assumes that the receiver unit on the heli is just a receiver, and not a complicated "all-in-one" unit with gyro etc built in.
You can also try importing a simple 35Mhx TX from the far east (China/Taiwan/HongKong/etc), not sure about issues like customs that you will run into. Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: antojk on December 24, 2009, 03:39:53 PM The receiver has a built in gyro. I thought of getting a TX, I have the required crystals with me. I infact contacted the people at MPowerShopping.in for an ESky 0404 TX they had extra.
Unfortunately I am having a bad experience with them. The guys has taken the money and not shipped the product!!. Do you know them. I dealing with one Mr. Ghanesh and he is playing hookey. I made the blunder of not going for a COD payment. I was in a hurry to get it before Christmas. Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: anwar on December 24, 2009, 03:49:19 PM I believe Mr Ganesh was active here for a few weeks a while back.
It might be the same case with many RC stores, where they get items from outside, and then send it to the customer (Note that I am making a guess here!). The good thing is that they handle with the customs troubles, the bad thing is the wait and a feeling of deception about being "In Stock" (it might be in stock at the supplier, and the hope is that it can reach the LHS in a week or so!). Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: antojk on December 24, 2009, 03:53:01 PM Mr. Ghanesh says he is shipped it to me! and gave me a fake airway bill no. Also he says it is in stock since this was part of a Esky Commanche kit he had. I don't believe in character assassination!! But he is not picking up his phone or not replying to my emails.
If he is bona fide, then the truth would be welcome, even if involves a delay in delivery!! Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: anwar on December 24, 2009, 03:56:27 PM Let me send a PM to him (should get delivered to him as an email also), so that he may clarify the situation. A thread like this on forums such as these tend to last for a long time, and may do significant damage to the credibility of an establishment, so let us give them a chance to clarify the situation.
Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: antojk on December 24, 2009, 03:58:26 PM Thank you, I just want fair play. I too do business. If I goof up,I always tell the customer what happened. After all we value our integrity the most..
Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: antojk on December 24, 2009, 04:06:52 PM http://www.youtube.com/watch?v=YMOzoM6aycg&feature=related
This is the heli. The build is average.. It was slightly tail heavy. I had to balance it. It is mode 2 by default. I got it when I went to their factory in Erlangen.. They are more known for their buggies and cars. They are a local player.. Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: anwar on January 11, 2010, 09:53:19 PM Did you get the TX finally, or are you still waiting for it ?
Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: rcforall on January 12, 2010, 06:36:25 AM It might be the same case with many RC stores, where they get items from outside, and then send it to the customer (Note that I am making a guess here!). Anwar , Such generalization is not acceptable , we have over 400 feedbacks for people to see openly on E Bay and around 10 feed backs right here on RCINDIA . Yes we can at times have delay's in supply but not attending to customers calls , mails etc is not an option I am sure 99% of us would resort to . From our experience so far we have seen that buyers also tend to expect domestic couriers to be delivered next day , they also need to have reasonable expectations . Tracking in the case of many domestic couriers is not very effective and at times could be misleading as I think the attitude of not updating progress on line by many couriers is quite common. Sai Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: anwar on January 12, 2010, 08:38:10 AM It might be the same case with many RC stores, where they get items from outside, and then send it to the customer (Note that I am making a guess here!). Such generalization is not acceptable , we have over 400 feedbacks for people to see openly on E Bay and around 10 feed backs right here on RCINDIA . I used the word "MANY", not "ALL"; and that is based on what I see in practice. How else can you explain someone taking money from the customer, but not talking about shipment ? And do not worry about the "image" of LHS in general. People are already aware of the general feedback about various stores. Title: Re: Wanted Cheap 4 Channel TX 35 MHZ for indoor heli Post by: anwar on January 12, 2010, 03:20:16 PM This is most unfortunate :(
http://www.rcindia.org/rc-outlets-and-resellers/buyer-beware-mpowershopping/ |