RC India

RC Baazar => Wanted => Topic started by: mkmkmk on June 18, 2012, 02:14:26 AM



Title: wanted radio control for suncon monster car
Post by: mkmkmk on June 18, 2012, 02:14:26 AM
hi
i have lost the radio control of this car,please help me find sum alternative for this ,,,i will be very thankful

below are the pic,, inside view and outside view

thanks


Title: Re: wanted radio control for suncon monster car
Post by: mkmkmk on June 18, 2012, 10:02:30 PM
hey guys help me


Title: Re: wanted radio control for suncon monster car
Post by: mkmkmk on June 24, 2012, 05:57:47 PM
no one have any knowledge of this


Title: Re: wanted radio control for suncon monster car
Post by: VC on June 24, 2012, 07:05:12 PM
Try contacting them here:

http://www.hktdc.com/manufacturers-suppliers/Suncon-Toys-Industry-Ltd/en/1X001Q9L/


Title: Re: wanted radio control for suncon monster car
Post by: rastsaurabh on June 24, 2012, 07:48:21 PM
Hello mkmk, I can give u a sol ........ Apply this only in case the trucks original radio was NOT digitally proportional. Which looks it was not what I can make seeing the ckt . Try putting a servo at the front steering and buy an brushed esc + battery 2s....this will give much better performance. See a post in this forum with word truckzee by rupeshkrishana. Why suggesting this ???? I have tried it my self and was very satisfied.


Title: Re: wanted radio control for suncon monster car
Post by: mkmkmk on June 24, 2012, 09:46:48 PM
hi saurabh

it already have a servo in front,,if i buy a brushed ESC +battery,,how should i make it run,with out the remote,,i saw that post truckzee it was very very good,but didnt help for my problem,

thanks and appreciated


Title: Re: wanted radio control for suncon monster car
Post by: rastsaurabh on June 25, 2012, 01:34:16 PM
Sorry i forgot to add the 2.4 Ghz remote it would be cheap  Approx = 2000/-

Is the servo digitally Proportional ???? It may be a simple motor with an arm. or a regular servo with circuit.

In case it is just a motor with gears and arm... then above sol is the best.

Else trace the signal to ESC from existing Ckt and input to the new RX.

First clear was the old remote 2 ch digital proportional ?

regds
Saurabh