|
Title: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: pravinxp on January 25, 2014, 10:29:51 AM Hi I want to buy XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable or
XT60 to 6 X XT60 ESC Power Breakout Cable - Prefered. Please let me know if you have any leads. Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: rcrcnitesh on January 25, 2014, 11:31:18 AM Why dont you solder them yourself.
Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: K K Iyer on January 25, 2014, 11:34:50 AM Do you really need 6 XT60 outputs?
Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: pravinxp on January 25, 2014, 11:41:50 AM Yes bro I need 6 ourputs...
Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: saikat on January 25, 2014, 11:58:12 AM building a hexacopter ??
Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: pravinxp on January 25, 2014, 12:04:11 PM yes. I have all the components other than this power distributor. Earlier had built one for Quad. So now to solder one for hex I need to get either the XT60 x 7, so instead I thought I can buy one power distributor, if its available in India.
Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: chintal on January 28, 2014, 02:26:42 PM Quadkopters.com has it u can buy it from them if you wish to
Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: chintal on January 28, 2014, 02:38:36 PM http://www.quadkopters.com/product/xt60-to-4-x-3-5mm-bullet-power-breakout-cable/ (http://www.quadkopters.com/product/xt60-to-4-x-3-5mm-bullet-power-breakout-cable/)
Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: pravinxp on January 28, 2014, 02:43:45 PM its for quad... mine is hex... so need 6 outs
Title: Re: XT60 to 6 X 3.5mm bullet Multistar ESC Power Breakout Cable Post by: chintal on January 28, 2014, 03:26:12 PM Dude buy two pairs of bullet connectors solder them
Put some some heat shrink nd u r good to go |