I want to build a complete RC trainer plane, with landing gears having maximum wingspan of say 1300mm.
Any1 has plan for same or can any1 help me with calculations involved in constructions.?
Any sites for plans and construction details with proper explanation.

Check out the links
http://www.spadtothebone.net/freeplans.htm
http://www.instructables.com/id/Complete-Guide-to-Building-Your-First-DIY-RC-Foamb/
http://www.rcgroups.com/forums/showthread.php?t=1174874

Please visit www.vortex-RC.com

Do you have the elecs or you should buy them.

50inches

I have electronics!

what electronics.

Brushless motor, 2 and 3 cell lips, servos esc and tx rx set

Quote from: utkarshg13 on October 04, 2014, 11:15:41 PM
Please visit www.vortex-RC.com

Had look on this site and now thinking to buy instead of making it, but how is the quality and performance of the plane .?

What motor, esc, battery, servo etc. ?

That plane is of very good quality and very good reviews (came upon only one thread though).

Need landing gear construction help for plane brought from vortex-rc.
I have 2 foam wheels of 20mm. How to proceed with landing gear and what position it should be placed .?

Take by cycle wheel rods and bend them as u like. .watch my home made plane landing gear are made of that rods.

@radiocraft
Why did Vortex make it without wheels?
For a good reason.
Ask them.

@radiocraft
I hope your kit must have reached you. If not, it will reach in a day or two.
In my opinion if you are a beginner then drop out the plan of adding landing gears to your VT-Allrounder. Because adding gears will add to more complexity and moreover landings would be tough if you're new to flying. Landing itself is always a challenging task. The skids provided in the kit reduce crashes and damage during landing. Believe me, you'll love to land it on skids. It comes to stop within 2m ofcourse if landed properly.

When you master it then surely you can go for gears

I think without undercarage you should learn proper hand launch i think tricycle landing gear is ok for trainer you should fix nose gear for your convinence

my trainer has tricycle undercarriage see picture bellow