Print Page - Which glue should I use?

Title: Which glue should I use?
Post by: RcStore.In on August 27, 2015, 08:43:42 PM

Hi friends,

I'm using hot glue and fevicol SR for by RC Model. because of hot glue model is getting heavy and fevicol RS is melting foam.
can any one suggest me what should is use for my model, which can be easily available in pune. ???

Title: Re: Which glue should I use?
Post by: romanxdsouza on August 27, 2015, 09:35:49 PM

http://www.rcindia.org/tools-materials-and-building-techniques/locally-available-epoxy-andor-caglue-for-foam-planes/
my favorites below

Title: Re: Which glue should I use?
Post by: RcStore.In on August 27, 2015, 09:40:28 PM

Thanks.
I'll try it out.

Title: Re: Which glue should I use?
Post by: flyingboxcar on August 28, 2015, 01:59:49 PM

Fevicol SR 998* or Equivalent is Synthetic rubber based adhesive and contains solvent that will melt most foam. Depending on foam you are using you can use use the glues already suggested or for certain foams like Elapor only cyano is recommended. If using epoxy (araldite) you need to keep in mind that the glue joint will be brittle and not flex

Title: Re: Which glue should I use?
Post by: shobhit17 on August 28, 2015, 06:13:05 PM

Well the Fevicol Sh takes a long time to dry specially in humid weather.... Fevicol has come out with new quick drying types..... Maybe we can try that and it should be fine. At Allahabad and Lucknow I could not buy it.... maybe you will find it and use it well... they are Fevicol Rapid X and Favicol Pur 1

Title: Re: Which glue should I use?
Post by: RcStore.In on August 30, 2015, 01:43:37 PM

Hi,

Fevicol Sh it's take long time to dry. can any one suggest something else.

Title: Re: Which glue should I use?
Post by: shobhit17 on August 30, 2015, 02:04:59 PM

please read my earlier post.... the new fevicol stated there takes much less time.

RC India

General Topics => Beginners Zone => Topic started by: RcStore.In on August 27, 2015, 08:43:42 PM