Got my MERV in February {:)}, the following upgrades have been made so far :
RPM Arms
RPM Front Bumper
Traxxas Aluminium Pushrods
Traxxas Aluminium Toelinks
Traxxas Motor Heat Sink
Traxxas Wheelie Bar
ST Racing Concepts Front & Rear Aluminium Shock Tower (Blue)
ST Racing Concepts Motor Mount (Blue)
ST Racing Concepts Front & Rear Aluminium Rocker Arms (Red)
GH Racing Aluminum Steering Block Set Front (Red)
Proline Dirt Hawg I on Desperado Wheels.
The Pics :
Without the cover :
Good stuff.
Got any running videos?
I do have a few, will upload them soon !!
Got a HPI Savage XS as well, will be uploading that too.
More about my MERV,
I'm running Traxxas Power Cell 2*2S 2200 MAH 25C Lipo's in parallel.
My running is mostly 50% smooth tarmac and 50% loose dirt, grass (mostly) etc.
The gearing is stock. I've also upgraded the shock springs to black (front) & pink (rear). the stock springs are crap and should be upgraded immediately, the car used to squat during hard acceleration, turns and used to affect handling a lot but after the spring upgrades it handles very well. i've also swapped the stock traxxas talon tyres to dirt hawgs, they give about 1/2 inch more to ground clearance...helps when i'm gunning in the grass ;D.
The motor used to heat up a lot earlier but after the heat sink upgrade it is much cooler now. Any future or current MERV owners, please upgrade to
RPM arms and bumpers ASAP for added protection and less down time....just my suggestion :hatsoff:
Overall i'm very impressed by this little truck (i also own a savage XS) and it runs with attitude !!!!
Few pics of my Savage XS ;D :
Nice! Those A-arms on the MERV look beefy! Would love to see videos.
thanks buddy, RPM A - arms are a necessary upgrade, the stock ones break very easily, will post videos in a few days !!
Both of them together :
Video of my E Revo VXL :
http://youtu.be/xaCwWvFSXw0
Savage XS Flux :
http://youtu.be/zVy5Mz3CSVU
Grt upgrades... I too own a e-revo brushless but with a Mamba Monster setup.
From where did you purchase the upgrades?
Have you tried e-revo wth 3s LiPO ??
happy revving....
thnx buddy, i mostly buy my stuff from amainhobbies & ebay.
you mean your setup is mamba max pro right ?? mamba monster is 1/8th scale and would not fit on the
1/16 e revo vxl.
would love to see your setup, kindly post pics ;D
haven't tried 3S yet but have a 3S battery already in cart at amainhobbies with some other stuff, gonna order it next week.
2S is fast enough, let's see what 3S does !!
Or do you have a E Revo Brushless 1/8th scale ??
I have a 1/10th scale erevo brushless with mamba monster 2200kv setup.
Using turnigy 2s lipos.
Sent from my GT-N7100 using Tapatalk 2
mine is the 1/16th e revo vxl, its a little fun monster !!
dude post some pics n vids,