Pilot QB 20S for 2015 Sweepstakes - in Corro & Electric

Started by sanjayrai55, July 16, 2015, 06:40:21 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

sanjayrai55

Have made a couple of QB 20 Low Wingers - one of my favourite models. Decided to try out a shoulder winger, with a full 4 mm wire landing gear
Plans available on outerzone.co.uk

Specs:


sanjayrai55

Am trying to keep the weight to about 1.3 Kg, and will use a TGY 3536-1250, with 40 A ESC, 10*6 or 10*7 prop, 3000-3300 3S LiPo.






sanjayrai55


sanjayrai55


sanjayrai55

Battery & ESC compartments separated by a 4 mm crutch



Guide Tube for nosewheel pushrod




sanjayrai55


sanjayrai55


sanjayrai55


sanjayrai55

Received the motor yesterday - HK Registered air mail in less than 2 weeks  ;D ;D

Maiden next weekend for sure  8)

sanjayrai55


sanjayrai55


sanjayrai55


sanjayrai55


Sandeeppande


satz flying

Trust yourself

wingmanbunty

EAT ,SLEEP , FLY

sanjayrai55

Yay! I got comments  :D

Thanks Sandeep, Satish, Bunty

sanjayrai55

Showing off my new Control Throw Deflection gauge  ;D



Ready for some Vinyl decoration




vishalrao


sanjayrai55


wingmanbunty

 {:)}like the color combination blue prop. cover and upper area. very neat and clean construction really inspiring. :thumbsup:
EAT ,SLEEP , FLY

sanjayrai55


sanjayrai55


sanjayrai55


jayantpradhan

fan of scratch building......

rcrcnitesh

You leave me speechless every single time.
Maker | Aeromodeller | Teenager

b4ggu

How nice Sanj. Too good.  

What have you used for the decals?

Is it packaging tape or sticky trim?

Also I can see  you strengthened the bottom of the Coro Fuselage with bamboo BBQ sticks... very innovative indeed.

BTW where did you buy the vented prop spinner from? Was it HK??  I could do with ordering a couple of those!

Also do let us know how the wire undercarriage fare? You have always used aluminium ones in the past.. Are the from HK too??


b4ggu


sanjayrai55

Thank you Jayant, Nitesh, Dee

Dee, I use Vinyl Sign tape for decor. The entire build takes me about 20-24 hours

b4ggu

Quote from: sanjayrai55 on July 22, 2015, 05:07:29 PM
Thank you Jayant, Nitesh, Dee

Dee, I use Vinyl Sign tape for decor. The entire build takes me about 20-24 hours


Thanks Sanj..

Now that is amazing speed...No one can beat that I am sure..  It takes me months..as I only get to spent 3 hours every Friday...

prashant_rc

Sanjay sir models are inspirational, making a model with all decals in 24 hours time is awesome speed, i know it takes lot of hardwork. Superb build sir.   :salute:

For landing gear, have u used steel spring wire or cycle spoke, and sprung nose wheel assembly

Regards
Prashant

sanjayrai55

24 hours is a long time, when working 2-3 hours a day!

For landing gear I bent 4 mm Spring Steel wire into shape. I got some nose gears built by a spring manufacturer based on a sketch I gave them. Could have bent them myself, but he had proper machines and heat treatment facilities

maahinberi

Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.

sanjayrai55

Thanks Maahin. It flies well  ;D

Will take a video tomorrow

sanjayrai55


sanjayrai55


sanjayrai55


jana.f22

3D addict

sanjayrai55


prabal276


sanjayrai55


harshit batra

#41
that was a very good model .

sanjayrai55


b4ggu


sanjayrai55

Thanks Dee. Flies rock solid - check out the video

b4ggu

Wow very good flyer too as you said on the phone too you did not even have to trim the model.... This will be the next one on building board for me.
Thanks Sanj...

prashant_rc

Nice stable flying sir,  {:)}.  
sir need some tips how to achieve straight taxing on ground

sanjayrai55

Prashant, firstly you need to have some steering - either a steerable nose or tail wheel. Then, do not give too large stick inputs. You can practise while taxying.

sundaram

That's one beautiful model Sanjay Sir. How did I miss it in the first place. Awesome super likes.

sanjayrai55


sainath

Hello Mr Sanjay. this is really beautiful model.
with 3536-1250 motor, 10 X 7 prop, 40-50A ESC, 10 gm MG Servo, 19 gm MG Servo, which other parts u have used. like hinges, push roads, landing gears, etc. step by step making will help all members who are interested in making similar model. 

also, do u suggest similar product with any local dealer.

sanjayrai55

1. It seems from your questions you have never built a corro model. Do not start with this - it needs advanced skills both in building and flying
2. Regarding Landing Gear etc. I suggest you read through the thread again.
3. For me to get a Corro model from a local dealer is not only offensive, it is the precise antithesis of why I build them

sainath

ha sanjay ji ur right. i want to try it first time. but as u said this model will be difficult for me, can u suggest any other coro model for new user.

sanjayrai55

Do a search for Avispad on this forum. You will find all the information you need. And, please open another thread for these kind of queries

rcrcnitesh

Or you can also build the corro pusher trainer by extremesports on rcgroups.
Maker | Aeromodeller | Teenager

sanjayrai55

Still flying  ;)

And still having fun  >:D >:D. Vid this morning

(watch in HD 720)