BRAINWING QF Ver.01 QUAD FRAME

Started by hemanthtguru, July 22, 2011, 01:51:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

hemanthtguru

AFTER LOTS OF CONFUSION CREATED !!! THE CONFUSION FREE POST ON THE FRAME

Multirotor Freak

hemanthtguru

#1
LOW RISE NON FPV VERSION

THE PACKAGE INCLUDES THE FOLLOWING:

Dome Center --> 1 Set
Dome Arc --> 4 Nos
Boom Carrier --> 2 Nos
Electronics Carrier --> 1 Nos
Low rise landing gear --> 2 Pairs
Motor mount --> 4 Sets [1 Set = 1 upper hold + 1 lower hold]
Lipo holder --> 1 Nos
Nylon spacer --> 8 Nos

[Please see the picture]

Cost: 700 Rs + Shipping  :thumbsup:

Things u need

for the boom:

1/2 by 1/2 inch alu rod [ cut according to ur boom size ]

for putting everything together

all bolts are 3mm width

30mm - 36 bolts [ around 40 nuts for that]
10mm - 16 bolts [1 washer on each]
60mm - 4 bolts  [ washer 2 on each]

Upgrades:

Double low rise landing gears --> 2 Pairs @ 72 Rs
High rise landing gears [ 15 cms off ground high ] --> 1 nos @ 30 Rs each [4 required but use 8 for better strength]

Assembly Notes

Use 3mm bolts with the give spacers; different lengths are required [I will post them soon]
Use 1/2 by 1/2 alu rods to make the booms [Only 2 holes required]

-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8-8

Combos



First Combo
1:Frame
2: M3 [ also called ALLEN key ] bolts + All the hardware required for the setup
3:Washers
4:Booms [ Pre Drilled ]

Cost 850 Rs
---------------------------------------------------------------------------------------------------------------

Second Combo

1:Frame
2:Flat head bolts + All the hardware required for the setup
3:Washers
4:Booms [ Pre Drilled ]

Cost 800 Rs
----------------------------------------------------------------------------------------------------------------

Third combo
1:Frame
2:Booms [ Pre Drilled ]

Cost: 750 Rs
-----------------------------------------------------------------------------------------------------------------
HIGH RISE LANDING GEAR COMBO

1:High rise landing gear --> 8 Nos
2:Flat Blots --> 12 Nos
3:Washers --> 30 Nos
4:Nylon spacers --> 4 Nos

Cost: 30 X 8 + 15 = 255 Rs
------------------------------------------------------------------------------------------------------------------
HIGH RISE LANDING GEAR COMBO - Super

1:High rise landing gear --> 8 Nos
2:M3 Blots --> 12 Nos
3:Washers --> 30 Nos
4:Nylon spacers --> 4 Nos

Cost: 30 X 8 + 30 = 270 Rs
------------------------------------------------------------------------------------------------------------------

Shipping as per packages is Extra

Contact details

E-mail:
Phone: 9902222294



Multirotor Freak

hemanthtguru

I will soon making a video on showing how to assemble the frame
Multirotor Freak

ujjwaana

This is an excellent initiative Hemant! After some succesful stint with Laser Cutting Balsa plans, I was thiking on the same line of providing kits at Break-Even, but balsa logistics caused too much a problem.

Could you please give more details of the frame, like dry weight, suggested power system, material of the boom in particular. This would make people make the right choice of BOM, and even make people with existing frame migrate to yours if the power system permits.

Well done!
Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother

hemanthtguru

THANKS;

The dry weight is 358 grams with rods..

U can use and motors, please tell me ur motors size i will customize the mount for u....

and the tested and proved boom length is 20 Cms for 9 X 6 props + 15 A motors [ 880 kva ]
or
29 cms for 10 X 6 props + 22 amp motors [ 880 kva ]
Multirotor Freak

hemanthtguru

Here are the pics of the motor mount with turnigy 2213 motors
Multirotor Freak

anwar

Still unclear about the nuts and bolts needed.  It seems like the buyer of the frame will still have to hunt down the right sized nuts and bolts ?  The same with the aluminium booms.

It would be really convenient if everything needed is included, of course at a higher price if need be.

Sorry to say, but PLEASE DO NOT POST ASSEMBLED PICTURES, if everything shown in the picture is NOT included.  Please put in at least one picture of WHAT EXACTLY YOU ARE PLANNING TO SHIP !!!! :banghead:
Hangar : Please see my introduction.
RC India forum and me : About this forum.

hemanthtguru

I have use the assembled pic to show how every thing goes together ...that's all

i have mentioned the parts in the package, i think it was better the my previous attempt  ???

I will uploading pic of what i am shipping with package...
Multirotor Freak

ujjwaana

Quote from: anwar on July 22, 2011, 02:53:08 PM
Still unclear about the nuts and bolts needed.  It seems like the buyer of the frame will still have to hunt down the right sized nuts and bolts ?  The same with the aluminium booms.
Sorry to say, but PLEASE DO NOT POST ASSEMBLED PICTURES, if everything shown in the picture is NOT included.  Please put in at least one picture of WHAT EXACTLY YOU ARE PLANNING TO SHIP !!!! :banghead:

Ha Ha!! A perfect recipe for another riot on the the forum!! I guess the Aluminum Boom is the part of the pancake. Ain't ? See how right Anwar is in his opinion!!!

<Edit> Hemant, it would be good that you have a complete frame combo option which just needs Electornics - like and ARF. It is a PIA to look for the right boom and get them in small quantity.  One may burn more fuel instead of buying the combo from you.
Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother

anwar

#9
Hemant - Please put yourself in the shoes of someone who has

1.  4 sets of power system (Motor, ESC, Prop and prop adapter).
2.  A quad controller board (like the HobbyKing one, or the one from Ashta bhai, or even the DIYDrones one).
3.  Receiver, Radio and Battery.

Now think about what else he would need ?  And "what else" would involve everything else needed, without having to hunt down individual bits and pieces.  That is what you should be attempting to package up (if possible). 

While I may sound annoying and this whole thing feels frustrating to you, this is also for your own good.  We do not want people to give you negative feedback because they expected something, and you delivered only part of it.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

CrazyPilot

Hemant Sir, how old r u? just curious???
When you fly electric, fly clean, fly quiet, and fly safe!

hemanthtguru

PLEASE PLEASE PLEASE do not append the word " SIR " in front of my name  :hatsoff:

Iam 20 Yrs old
Multirotor Freak

hemanthtguru

the aluminum booms cost 120 Rs for 12 feet [ 1/2 inch by 1/2 inch] and u can make around 20 booms out of it, in just 3 mins a boom,

But if i make i have charge u 12rs a boom + u will have to pay a shipping of 30 extra because the package becomes volumetric , so decide

I made this to reduce the cost of the frame , adding booms to it in the package will waste ur money  :bow:
Multirotor Freak

anwar

You are not factoring in two things... time and fuel costs.  So yes, while you THINK you are saving others money, you are not ! :)

And please include all the needed nuts and bolts also, for an added fee.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

hemanthtguru

for the boom:

1/2 by 1/2 inch alu rod [ cut according to ur boom size ]

for putting everything together

all bolts are 3mm width

30mm - 36 bolts [ around 40 nuts for that]
10mm - 16 bolts [1 washer on each]
60mm - 4 bolts  [ washer 2 on each]
Multirotor Freak

ujjwaana

Quote from: anwar on July 22, 2011, 03:40:05 PM
You are not factoring in two things... time and fuel costs.  So yes, while you THINK you are saving others money, you are not ! :)

And please include all the needed nuts and bolts also, for an added fee.
Totally agree with Anwar. The day I visit the bustling SP Road in Bangalore for any shopping, the entire evening is lost in relaxing from pollution, fatigue and nuisance from shop keepers.

I would suggest you offer separate combo options and let people pickup the one they think is right. You are already selling thing at honest price.

Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother

hemanthtguru

Multirotor Freak

CrazyPilot

Quote from: hemanthtguru on July 22, 2011, 02:34:36 PM
2: M3 [ also called halen key ] bolts

Bro its called Allen or Hex Key. Also clarify, are u giving the key with bolts?
When you fly electric, fly clean, fly quiet, and fly safe!

hemanthtguru

yes it is that itself...just a spelling mistake..... :bow:
Multirotor Freak

hemanthtguru

2 frames in stock, and even high rise landing gears....

anyone wants the frames...
Multirotor Freak