RC India

 :)HI GUYZ ,



WANT SOME STUFF TO GO COZ I'VE NO SPACE LEFT IN MY GODOWN NOR IN THE HOME, :(
ITEMS ARE AS FOLLOWS,
1)SU 26 AEROBATIC MODEL 1300 MM SPAN
CAN DO ALL TYPE OF EXTREME AEROBATS,
 CAN LET IT GO FOR 10K JUST LIKE NEW

2)61" SPAN FPV PLOANE WITH ELECTRONICS
MOTOR ,ESC , PROP,SERVOS .
SUPER STABLE FPV PLANE .
EXPECTING AROUND 5K FOR THIS SETUP....

3)TECHONE FUNFLY PLANE 1000 MM SPAN
WITH BL 1000 KV MOTOR ,30 AMP ESC AND 2 SERVOS
TOOK IT FOR AROUND 8K CAN SELL IT FOR AROUND 5K (NEGOTIATIONS OFFERED)

PICS BELOW....
WILL UPLOADLOADS OF MODELS AND STUFFS BY TOMORROW EVE.

REGARDS

THE FIRST PIC IS OF ANOTHER AEROBATIC PLANE ..
ILL UPLOAD THE PICS OF ANOTHER PLANES AND STUFF LATER



REGARDS

4)The first pic is of a super stable aerobatic plane made by me.
Can go up to 100 km+
Cost 6k including motor,esc,servos*4 ,battery ,and the kit
5)slow stick with motor,esc,servos 4.5k
6) 2d gimbal with controller nib 5.5k
7) 2000 mW video Tx Rx with Sony effio camera just like nib
Goes upto 11km.(proved) only for 8k
8)horizon hobbies glider 1500 mm span with motor,esc,prop,servos for 5k
9)450 mm Dji flame wheel with 1000 kV motors *4 ,
30 amp escs *4,
Battery 3cell 2200 mah,
Kk 2.1 controller and high landing gears
For 10k (negotiable)
10) Kk 2.1 controller 1300 rs
11) avionic hexa quad controller (can control up to hexa's)1500 nib
12) 2826 1100 kV turnigy motors
Can lift  1.5kg model with ease
And if fitted in a quad, can lift around 4kg (tested)(mine quad lifted at 85%throttle)
6 Pcs for 5k
 And a lot more stuff :)

100 km ?  :headscratch:

Opps ....
Typing mistake.
13.2km+

13)fpv camera with ir ,2*metal gear servos for pan and tilt  and night vision only for 2.5k (negotiable)
 

Hii Khitiz you have not sent me my yconnector...you want say something about it an my payment

Hi! Whatsapp me pics of the planes u have for sale on 9837303555

Hi guyz....
I have a professional setup for aerial photography ,videography and cinematography.
I know how much does its costs for getting into a.p.
 I've got a professional setup for sale.
It includes the following items.

Dji flamewheel 450 frame with integrated PCB.
4* 2212 1000 kV motors
4* rapid 500 hz 30 amp esc
Genuine cc3d controller (perfectly tuned)
CNC 2d gimbal
Xiaomi sports cam genuine.
600 mW Tx Rx system boscam genuine
High landing gears for Dji 450 frame.
Cf props 1045 *4 pcs
Fs ct6b Tx Rx with extended range upto 5kms.
I also have APM 2.6 with GPS ,osd ,telemetry, power module and anti dampner board for mounting APM.

Hello Sir! Can  you share a pic of the Pan&Tilt cam with night vision , pls?

Yup....
But on Whatsapp.
Pic quality is damn big..
7385568473

techone funfly pictures ?

I'll send them on Whatsapp.
Uploading problem pic size is damn big
And

Pucs of pan and tilt cam below.
Bump

Kshitij, how much for the XiaoMi Yi  sports camera ?

6k

bump
No one three there???

Bump

Please post pics of other items too

I never received the plane i booked . Been 2 months plus.

Dhruva have u already paid for that??

No i didn't made any net payment . From the starting it was going fishy . I was suppose to meet him but lots of excuses and never received the plane . Lots of promises but no response.  Big story!

That's bad.

You know everything dhruv bro
Plzz don't blame me it wasnt my mistake
And plzz im ready to send u another plane for that

Bump no one there???
Prices reduced
Update below

Buddy is my plane shipped?

CAUTION ⚠ : Think twice before paying for the items.

Even this time i didn't received any items.

Because of my last time experience, he agreed to ship the item and after i make sure everything is okay , i was supposed to make the payment .
I was promised whole time that it was shipped by DTDC but was a lie.

After asking for tracking again and again , he tells me to make payment first and then he will ship.

Making the payment to other members is fine if there record is clean but in this case he already got 1 negetive feedback and deals are always fishy.

That's a holy crap
Do not interfere in my business
And u said that u will send the payment when u will receive the plane .
Can anyone send anybody anything like this????
And I'll request admin sir to remove his post
And abt the parcel I sent I'll update

First he said he'll make the payment half before receiving and half after receiving
And now he said that he'll make all the payment after receiving the plane .
He was making a hurry so i was in confused situation .
And my home mates weren't agreed to ship it instead I sent it

You didn't paid for it So didn't got it .
And last time............. you know everything what happened .
That wasn't and isn't my fault .
You talked to my mom also regarding .
So you are making my business crappy coz of this .

I do not Intend to interfere what you are doing buddy ("business if you are saying :thumbsup:)

I just posted my experience. I know it was a bad one so i don't think updating other members about it is a crime.

Anwar Sir , if you feel its wrong then please do delete it.


Kshitiz you agreed for 2 days with me that I recieve and then pay . But the point is here that - You lied it was shipped .

You told it was shipped . You are still saying from Saturday .
Do you mind updating here with proof ?

I even said " Send the tracking id and pic of box packed and I'll make NEFT " for which i waited 2 days . And then you said that make payment then you will ship. So lies all time  :thumbsup:


I tried making a deal twice but dont know how its always fishy and a lot of excuses .


Looking at the pic you send me of the product , i see that you don't even use heat shrink and you want me to believe that Electronics are fine .
And the BEC as you said is not there or probably you fried it and don't even know about it .

Also i have seen a comment from Satya Gupta sir regarding the way you Handle electronics and etc.


Good luck with your sale.


Update : Please see the picture . Can you say by looking at those naked connections that the electronic components will be fine ?

Check the 2nd, 3rd and 4th pic too . In the morning he send me the pics and tells me that he just clicked it . Well it looks like night time. So i found that fishy .

Not putting pics here because they are huge can't be the excuse. Make them smaller and post it here. Experienced guys can find out faults and missing things from it and that will help beginners.

If u have any idea then tell me how to upload
I even tried taking screenshots but ain't working.
And plzz send me the posy of Satya Gupta sir regarding my manner to handle things

Do u think I'm a crap dhruv??
I'm in this hobby from a long time
And I can send u the pic of the HK ESC without bec
I havant burnt it.