I had recently purchased items from HK and it was taking too long to reach me
infact HL was unable to give me a tracking number for my shipment. Hence I ordered again and ended up having a few items duplicated at my disposal. I am selling out a few of those items. Interested people may contact me directly. The cost caters for HK cost, expedited shipping through EMS and a 30% Costoms duty on both shipments. All the items are new and unused. These items are:-
1. Turnigy 1450mAh 3S 11.1v Transmitter Lipoly Pack Rs 925 (qty 01)
The T1450TX-3 lipo pack is an excellent replacement in radio's which used 8 x AA cells in flat formation, such as many Futaba or Sanwa models.
Bring the world of Lipo technology to your transmitter today!
A perfect conversion to Lipo for any transmitter with an 8xAA flat form battery compartment.
The pack includes a JST-XH charge port plug, and a Futaba plus a JR style discharge plug!
Capacity: 1450mAh
Voltage: 11.1v (3S1P)
Size: 93x40x14mm
Charge Plug: JST-XH
Discharge: Futaba & JR
2. Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories Rs 2400/- (qty 01)
Features;
Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.
Spec.
Input Voltage: 11~17v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 355g
This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST-XH adapter.
Note: Power supply not included.
3. Turnigy D3548/6 790KV Brushless Outrunner Motor Rs 2250 (qty 01)
Spec.
Battery: 3~5 Cell /11.1~18.5V
RPM: 790kv
Max current: 40A
No load current: 1.8A
Max power: 715W
Internal resistance: 0.040 ohm
Weight: 159g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x48m
Prop size: 11.1V/12x12 18.5V/11x7
Max thrust: 1650g
4. Hobby King 60A ESC 4A UBEC Rs 1975 (qty 01)
Specs:
Constant Current: 60A
Burst Current: 80A
Battery: 2-4S Lipoly / 5-12s NiXX
SBEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Size: 70 x 32 x 17mm
Battery Wire: 14AWG
Motor Wire: 14AWG
Weight: 61g
Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)
Note: User manual can be downloaded from the files Tab.
6. HK Analog Servo 10g Rs 250 (qty 06)
Torque: 1.4kg/cm @ 6v
Weight: 10g
Speed: 0.10/60deg @ 4.8v, 0.09/60deg @ 6v
Voltage: 4.8v~6v
Plug: JR
SHIPPING WILL BE AS REQUIRED FOR SPEED POST. All items or single items can be purchased by friends out here.........
Print
