Hi,
I have a Futaba PA-2 Pilot assist for sale (lightly used, mint condition). This is really useful if you are starting out in RC airplanes. Here are some specifications for this unit.
FEATURES: This Is A Horizontal Stabilizer For Model Aircraft and Incorporates
The Latest Sensor Technology.
Operates On A Single Aileron Servo.
Supports two Channels To Level The Wings and Bring Plane To Level
Flight.
Automatically Controls The Elevators and Ailerons, But When The
Modeler Operates A Stick, The Sensitivity Drops According To The
Amount Of Stick Operation and Stick Operation Has Priority.
Sensitivity Can Be Adjusted By Transmitters Having Volume Control-
(At Least 5 Channels and At Least One Extra Channel Is On A Dial.)
(See COMMENTS) Or By The Gain Control On The Amplifier Unit Itself.
Some Radios W/Volume Control Are: SKYSPORT 6VA, 6XA, 7UA, 8UA, 9ZA.
Other Brands Of Radios May Work If They Are Wired Like And Have
Connectors Like Futaba Has.
Servo Reversing Switches Located On Amplifier Unit.
INCLUDES: One Amplifier Unit Pre-Wired with 2-Pin and J Plugs
One Sensor Unit Pre-Wired with 2-Pin Plugs, Nylon Nut and Washer
One Instruction Manual
SPECS: Power Requirement: 4.8V (NiCd Battery fed via receiver)
Current Drain: 5mA (at 4.8V) (confirmed 9/99 amc/jquigg)
Amplifier Length: 53.5mm (excluding protruding parts)
Width: 33.5mm
Height: 14.5mm
Weight: 25g
Sensor Diameter: 33mm
Weight: 15g (excluding screws)
Here is a link where you can read more about this product.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNA35Retails for $60 at tower hobbies, you can buy this unit for Rs
2000 shipped to your door!
Interested buyers only. Feel free to ask any questions that you may have.
Thanks for watching.