MOTHER OF ALL SALES !!!
Hi All, After having burnt methanol for 7 yrs (may not be too long for most of you) I think I have had my fair share of this hobby. I need to get out of this (With Heavy Heart though!!). So guess what... everything I own is on the offer. Besides models, all the tools, chargers, radio, spares... everything that one can think an average aeromodeller would have accumulated over such a long time is on the offer. Obviously it is not possible for me to list everything but then I will be giving away these small things to those who go in for my scale models or better still the one who decides to pick up my complete hangar... I am located in Gandhinagar, Gujarat. My videos are on this link https://www.youtube.com/user/singhparambir/videos. (https://www.youtube.com/user/singhparambir/videos.) The hangar has the following models:-
Jenny Curtis 1/5 – OS 160 with Pitts muffler, requires minor assembly since I had dismantle it for transportation. The original wing struts were weak and had to be redone. That has been done. Not flown since then. Has seen three flights only. Video on my youtube link. The buyer also gets White Stryker all ready to fly free with this !!! Looking for 50K negotiable. Only with this model I will include JR 9X-II for 5K with LiPo. This is PCM model but I have been using FRSky Tx V8JT module on this for 2 yrs and just no problem. I will also give fuel filling box with electric pump and LiPo battery with this combo.
Piper J3 Cub – OS 160 with Pitts muffler, has seen about 20 flights. Minor hangar rash but still flies like a dream. All included, just needs LiPo to power electronics (I am including BEC) and your Rx. Video on my youtube link. Looking for 20K negotiable. Brand new Glow booster and charger free !!! I also have a spare set of main gears new in pack.
Easystar II – What do I say about this? Just plug you LiPo and Rx and she is ready to go. Had a minor crack on the top but that has been repaired and does not effect flying. She is a breeze. Looking for 8K negotiable. Great for learners. I will give a spare set of main wings with this for free. And if you are nice to me I will even give LiPo Rhino 2250 mAh 25C 3S with this !!!
EFlite Ultra Stik – Great small electric bird. Good for those who want to enter 3D. Has done two flights only. No cracks, dings or rash. Just plug your battery and Rx and good to fly. You can make flaps in this but I have only put ailerons. Looking for 9K negotiable.
Parkzone F-27 Stryker – This model is discontinued but those have it vouch for it as the only thing that can beat Funjet. This one has ACN motor and Castle creations ESC 60A. Takes 3S. Is a rocket. Have some videos on my youtube channel. Have a look at it. Has hangar rash but flies super. She is a dream in my hangar. The motor and ESC combo was itself $200. Looking for 8K negotiable. Have a brand new nose cone. Also have a new plastic hatch. Will throw in both with the model. And if you are nice to me I will even give LiPo Rhino 2250 mAh 25C 3S with this !!!
Phoenix Scanner – needs no introduction. OS 55AX mounted and tuned pipe. Hate to let her go. Minor hangar rash. BEC included. Just put in your Rx and LiPo. Looking for 7K negotiable.
Phoenix Trainer 60 – Just done maiden only. Has everything configured including flaps. Just a week old. OS 61FX mounted. Just put in your Rx and LiPo. Has BEC included. Looking for 15K.
Ronin – 2.5 mtr glider. Ailerons, flaps, elevator and rudder configured. Independent servos for all. Takes 3S. I am flying with 6000 mAh 3S Turnigy. Will give that for free !!! Done about 5 flights. Video on my youtube link. Looking for 15K negotiable.
JR 9X-II Tx – PCM model but I have been using FRSky Tx V8JT module on this for 2 yrs and just no problem. So you get both modules with this !!! I will also give 8 channel FRSky Rx with these – 5 of them or maybe 6 don't remember. I have LiPo installed in this radio and charge the Tx once in 3 months !!! I have a few Corona 72 MHz Rx which will be given with the radio. Looking for 10K for complete package. Please don't ask me to break the package – I will not do it. I will give Radio carrying box free with this !!!
MaxPro balancer and Charger with High wattage power supply – Works absolutely fine. Has a temperature sensor too. Digital backlit LCD display. Connector to charge all types of LiPo upto 6S, NiMh, Lead... I have a power supply smps based. Looking for 4.5K. Hardly anything to negotiate !!! Will be free for those who pick up scale birds.
Mixed bag of tools and spares and props – I really don't know how to list them. Some props are brand new. Some motors are still sealed. ESCs new in pack. OS No 8 plugs sealed. Infra Red Temp sensor brand new. RPM meter. Hand Pump for glow. Hand Pump for gas. Tubings. Wheels. Whole lot of tools. To see this you will have to walk in preferably. Mail me for motors if you are interested. I can send specific replies.
Please book JR-9X II for me.
Sorry JR 9X booked pending payment. If that does not come through you are next.
Sir Pl post pics of models
Pics on demand...
Ultra Stik available.
Trainer 60 sold pending payment
More pics
Piper J3 Cub 160
Stryker F27 with Mega ACN motor and Castle Creations ESC
Stryker F27 with 60Amp ESC and motor and prop
Jenny Curtis
More... Jenny Curtis for the scale lovers...
Hello Sir. Sent you pm RE : Piper J3 Cub
Radio, Charger and trainer 60 gone pending payments...
sir what is the price for easy star || and the balance charger and rpm meter and can post some pics of easystar
Ronin glider...
Quote from: harshit batra on December 11, 2014, 01:38:56 PM
sir what is the price for easy star || and the balance charger and rpm meter and can post some pics of easystar
Please check post... 8K for EZ II with spare wings
Scanner and Charger gone pending payment.
More assorted pics...
Assorted spinners all new (Rs 2000/- complete set)
Fuel pump for glow used but working fine (Rs 500/-)
Turnigy C2826-1900 not used. (Rs 1500/-)
10x47 slow flyer prop - Rs 250/- (pair)
keep checking
Easystar II
Master Airscrew 12x8 (Rs 250/- each) Have about 4 of these new sealed
Himoto glow booster, charger, plug wrench, fuel filler bottle for cars and small wrench brand new sealed. (Rs 1400/-)
KDS Gyro sealed (Rs 1400/-)
FlycamOne from ACME (Rs 500/-)
Assorted Servos all working. (Rs 3500/-)
Thunder Tiger heavy duty starter not used at all (Rs 1500/-)
Protective goggles (Rs 500/-)
Tail wheel 60 - 120 size (Rs 300/-)
Turnigy Plush 60 Amp ESC new sealed (Rs 2000/-), 5mm prop adaptors (2) (Rs 300/- pair), Heavy Duty RX Switch with Charge Port & Fuel Dot (new) Rs 500/-, 18Amp ESC MAX (Rs 400/-), Retract gear sealed new (had similar tried on Easystar) (Rs 1000/-)
Turnigy C1818 micro motor and ESC (Interesting project) new. (Rs 1500/- combo)
Fuel tubing 1 mtr each for gas and glow (Rs 250/- for 2 coils)
Metal motor mount (Rs 200/-)
Motor (rating unknown) with 20Amp ESC brand new sold as combo. (Rs 2000/-)
Assorted extensions and Y cables. (Rs 1000/- for all, will not break)
Assorted prop - 12x8, 13x6, 16x8 and 18x8 all new sealed. (About 16 of them. Complete goes for Rs 5000/-) Can break but you still need to pick up set of similar props)
Turnigy C3536-1450 brand new motor less mount. (Rs 1200/-)
Turnigy C2826-1900 brand new motor less mount. (Rs 1000/-)
Sir price for props and motors and esc...and servos also
check
2826.. 3536.. and two motor with esc. . Props...and prop adapter. ..and servos if they r 9g. ..Pl tell me the best price for that combocombo.
Quote from: kplkum on December 11, 2014, 10:02:47 PM
Sir price for props and motors and esc...and servos also
Please specify props and motors.
Sir,
Phoenix scanner please.
Thanks.
Pl see pm.
Regards
Quote from: K K Iyer on December 11, 2014, 11:21:39 PM
Sir,
Phoenix scanner please.
Thanks.
Pl see pm.
Regards
Sorry scanner sold pending payment
Quote from: K K Iyer on December 11, 2014, 11:21:39 PM
Sir,
Phoenix scanner please.
Thanks.
Pl see pm.
Regards
Sorry scanner sold pending payment.
Will stand by for Scanner.
Another pm. Kindly see.
QuoteTurnigy C1818 micro motor and ESC (Interesting project) new.
Turnigy C2826-1900 brand new motor with the motor mount on Turnigy C3536-1450
Turnigy C2826-1900 not used.
10x47 slow flyer prop
interested in above items please PM the price.
Sahil
Edit: do all the motors listed include hardware like motor mount, screws, prop adapters etc ?
Sorry for the inconvenience because of lack of pricing... Please appreciate it takes effort pricing all these. I have updated the asking price. Please note these are prices less shipping. That will be as actual. Should you have doubts, please PM me. Shall reply as soon as possible.
sir book jr radio for me.if anyone backs out
Piper J3 Cub Sold !!!
Quote from: parambir on December 11, 2014, 11:24:58 PM
Sorry scanner sold pending payment.
@parambir sir,
Still on first standby if original bid fails to materialise.
(If gone, kindly advise)
Regards.
Quote from: K K Iyer on December 13, 2014, 09:49:55 PM
Quote from: parambir on December 11, 2014, 11:24:58 PM
Sorry scanner sold pending payment.
@parambir sir,
Still on first standby if original bid fails to materialise.
(If gone, kindly advise)
Regards.
Noted. Payment awaited by Monday. If fails you are next.
Guess what guys... I found a brand new OS 55 AX in box. Opened only for pics. Up for grabs. Will want 11000/- plus shipping as actual. I will not negotiate so please don't ask me.
Status as on date. Starter sold. Scanner sold. Ronin sold. Charger sold. Piper sold. Trainer 60 and tx booked.
Available. .. Easystar II, stryker both , ultra stik, jenny Curtis.
Kindly book the TT starter foe me. Also give me your contact details. Thanks
Quote from: Ahmad on December 14, 2014, 01:26:18 PM
Kindly book the TT starter foe me. Also give me your contact details. Thanks
Sorry Already sold.
For all those who dont want to miss the bus... the most epic model - Jenny Curtis is still there. Considering the original price as listed at maxfordusa.com it is a steal. Check out its video at https://www.youtube.com/watch?v=CQt_w1vCbY8&list=UUWMcBq5-lW0e9JKqYV0pI4A (https://www.youtube.com/watch?v=CQt_w1vCbY8&list=UUWMcBq5-lW0e9JKqYV0pI4A)
Shipping can always be worked out.
Secondly check out the Ultra Stik I have. It is all ready to fly. Just plug in your Rx and battery.
Quote from: parambir on December 14, 2014, 09:11:11 AM
Guess what guys... I found a brand new OS 55 AX in box. Opened only for pics. Up for grabs. Will want 11000/- plus shipping as actual. I will not negotiate so please don't ask me.
Corrected - Rs 8000/-
What is meant by 8k sir for ezII and what are the electronics included
Status as on date. Starter sold. Scanner sold. Ronin sold. Charger sold. Piper sold. Trainer 60 and tx sold....
What is left:-
Easystar 2
F27 Stryker (Two)
Ultra Stik
Jenny Curtis
Slowstick (Yellow)
Buy a Radio and start flying again >:D >:D :giggle: :giggle:
Hahaha Naughty Sundaram. I missed the peri peri flesh ;)
Missing our flying too :thumbsup: :thumbsup:
Still got the servos ?
Also please let me know if you have any futaba fhss receiver
@parambir sir,
Perhaps you should hang on to the Jenny.
For old times sake? For why you got it in the first place?
Like my Goldberg Piper Cub kit that i bought in London in 1996, haven't started yet after 19 years, but wouldn't dream of selling.
Or try to export.
In India you may find a buyer for a Tiger Moth.
But for a Jenny, Stearman, Avro Monoplane or Pu Du Ciel? No enough cognoscenti perhaps?
If you need a place to hanger her, i'm at your service (after Sandy and Gusty sirs, presumably), even though there isn't an inch of space in my house, or in my Tx.
Really missed getting your Scanner!
Quote from: K K Iyer on January 08, 2015, 10:48:02 PM
@parambir sir,
Perhaps you should hang on to the Jenny.
For old times sake? For why you got it in the first place?
Like my Goldberg Piper Cub kit that i bought in London in 1996, haven't started yet after 19 years, but wouldn't dream of selling.
Or try to export.
In India you may find a buyer for a Tiger Moth.
But for a Jenny, Stearman, Avro Monoplane or Pu Du Ciel? No enough cognoscenti perhaps?
If you need a place to hanger her, i'm at your service (after Sandy and Gusty sirs, presumably), even though there isn't an inch of space in my house, or in my Tx.
Really missed getting your Scanner!
Thanks for the concern. But I would be changing my profile when I get back to flying whenever I do. May be scale is too big for guys like us. Every 2 to 3 yrs moving with them and being able to find a space to fly them. Too much. I sincerely hope I find a home for jenny.
Keep it stationed at one place where it's your roots, where you can always fall back and fly it. Possession of one scale Jenny Is unparalleled to any other class. One flight of it is enough to grace any occasion to glory.
I agree , i would have found a way to buy it but my flying skills are rubbish for such a model. Do keep it sir its a beauty
I'll transger the money today for the servos
Money transfered for the servos
Got the package , every thing was well packed . Will check the servos later in the evening