Universal Anti-vibration Shock Absorber Set For APM/KK/MWC

Description:
Item Name: Shock  Absorber
Material : Glass fiber
Color: Black

Features:
Suit for different flight controller, such as APM 2.5/2.6, KK, MWC, etc

Package Included:
1 x Shock Absorber Set

Buy Now:-
http://www.rcproduct.in/other-items-and-parts/79-universal-anti-vibration-shock-absorber-set-for-apmkkmwc.html

FTDI Basic Arduino USB Breakout - TTL 6 PIN 3.3 And 5V

Description:-

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.

This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.

This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.

One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.

Buy Now:-
http://www.rcproduct.in/other-items-and-parts/78-ftdi-basic-arduino-usb-breakout-ttl-6-pin-33-and-5v.html

The fastest and one of the best rc hobby shop in India!! It presents SUPERIOR AFTER SALES SUPPORT, AND ITS NAME STANDS for 100% quality products! Wanna order something rc product takes max 5 days to get it into India!! All products are Of A1 QUALITY!!

ZIPPY Compact 5000mAh 3S1P / 3 Cell / 11.1V 25C Lipo Pack

Spec.
Capacity: 5000mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 25C Constant / 35C Burst
Weight: 354g (including wire, plug & case)
Dimensions: 162x21x46mm
Balance Plug: JST-XH
Discharge Plug: 5.5mm Bullet

BUY NOW:-
http://www.rcproduct.in/zippy-lipoly-batteries/82-zippy-compact-5000mah-3s1p-3-cell-111v-25c-lipo-pack.html

20amp Simonk ESC [3s / 11.1v]

Technical parameters:

Weight: 22g
Size 50 * 23 * 8
Input voltage: (2-3S Lixx.).
Drive Current: 20A (Max: 30A/10S)

BUY NOW:-
http://www.rcproduct.in/all-speed-controllers/83-20amp-simonk-esc-3s-11-1v.html

pls stock mobius action cam

It will arrive in this weekend.
or maybe in next week.
--- Mobius Wide Angle B Lens ActionCam

i will inform you once i will get it..

Thanks

DIY Universal landing Gear Set

Specs:
length: 210mm
Width: 140mm
Weight: 22g With hardware

Buy Now:-
http://www.rcproduct.in/multi-rotors-parts/84-diy-universal-landing-gear-set.html

Multicopter 30A ESC With SimonK updated firmware

Features:-

    --Drive tube and high-power Mos, and Mos tube plus a separate heat sink, Extreme low output resistance of the PCB(printed circuit board),super current endurance.
    --The power input uses extreme low output resistance greatly enhance the power stability, and has the protective effect on the battery.
    -- Safety electrical function: when the power is turned on, regardless of the throttle stick in any position does not start the motor immediately, to avoid personal injury.
    --Separately voltage regulator IC for microprocessor. providing good anti-jamming capability.
    --Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
    --Using Simon K’s a dedicated multi-copter program tgy_debug, and the master chip with high stability crystal oscillator, making the motor control to more precise.

Product Details:-

    --Running current:30A(Output:  Continuous 30A, Burst 40A up to 10 Secs.)
    --Input Voltage: DC 6-16.8V(2-4S Lixx)
   -- BEC: 5V  2amp.
    --Size: 46mm (L) * 26mm (W) * 11mm (H).
    --Weight: 23g
    --Multicopter SimonK updated firmware

Buy Now:-
http://www.rcproduct.in/all-speed-controllers/86-multicopter-30a-esc-with-simonk-updated-firmware.html

LED Light / Status Display Extension Board Module for APM

Features:
- Suit for APM LED status display
- 2CH independant LED drive(Red/Blue)
- 5050 LED, direct plug into APM A6 A7 port

Buy Now:-
http://www.rcproduct.in/multi-rotor-flight-controller/88-led-light-status-display-extension-board-module-for-apm.html

New Item Arrival

Mobius Wide Angle B Lens ActionCam a 1080p HD Video Camera Set With Live Video Out

Specs:
Video format: 1080p HD @ 30fps, 720p HD at 60 or 30fps
Battery: 520mah
Video storage: Micro SD Cards up to 32GB
Weight: 39g (camera only)
A/V live out: Audio and video out available 

Buy Now:-
http://www.rcproduct.in/fpv-camera-monitor-audio-video-txrx/91-mobius-wide-angle-b-lens-actioncam-a-1080p-hd-video-camera-set-with-live-video-out.html

Gopro Brushless Camera Gimbal With Motors & Controller [Ready to Use]

Features:
- Simple structure and light weight,CNC aluminum alloy structure
- Brushless motor direct drive
- With anti-vibration rubber balls, easy to adjust
- Compatible with Gopro 3,2,1
- With 2pcs 2208 motors and BGC 3.1 gimbal controller and sensor(The BGC 3.1 controller is more better than V3 controller,it’s more stable)
- With motor protector which can help heat dissipation
- Gimbal weight:185g(not including camera)
You can also Use for Mobius Camera.

Package included:

    1 x Aluminum gimbal installed 2 motors (assembled)
    1 x BGC 3.1 gimbal controller and sensor
    1 x Pitch cable for receiver VR channel control the pitch by transmitter.
    4 x Anti-vibration Dumper

This is RTF version,you only need connect the battery on the plug,then it can work directly.
The Gimbal work alone,it don’t need the NAZA support,very easy for use.

Buy Now:-
http://www.rcproduct.in/fpv-camera-monitor-audio-video-txrx/89-gopro-brushless-camera-gimbal-with-motors-controller-ready-to-use-.html

New Item Arrival

ZIPPY Flightmax 2200mAh 3S1P / 3 Cell / 11.1V 40C Constant / 50C Burst

Spec.
Capacity: 2200mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 40C Constant / 50C Burst
Weight: 207g (including wire, plug & case)
Dimensions: 107x35x25mm
Balance Plug: JST-XH
Discharge Plug: XT60

Buy Now:-
http://www.rcproduct.in/zippy-lipoly-batteries/90-zippy-flightmax-2200mah-3s1p-3-cell-111v-40c-constant-50c-burst.html

Turnigy Multistar 4225-390Kv 16Pole Multi-Rotor Outrunner Best Quality...

The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

 The 4225-390 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 390
Lipo cells: 6s
Max Surge Watts(W): 330
Working current: 11 amps
Max.current(10s): 15 amps
No Load Current: 0.2 amps
Intemal Resistance: 0.24 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

Buy Now:-
http://www.rcproduct.in/brushless-motors/93-turnigy-multistar-4225-390kv-16pole-multi-rotor-outrunner.html

Do you have tx lipo? Turnigy 2.65 11.1V??
I need 2 pcs

At this time i have 2500 mah tx lipo..

Here is link
http://www.rcproduct.in/transmitter-lipo-pack/17-zippy-flightmax-2500mah-transmitter-pack-futabajr.html

But if you need than i can arrange..

Thanks

Is the size same as that of turnigy lipo? would it fit 9X battery compartment?

Yes,
It can fit on turnigy 9x compartment.

i am also provide this with Turnigy 9x.

You can see here.
http://www.rcproduct.in/-24ghz-turnigy-india/46-turnigy-9x-9ch-transmitter-w-module-8ch-receiver-mode-2-turnigy-2650mah-3s-1c-llf-tx-pack-futabajr.html

Thanks
 

Dr. Mad Thrust Electronic On/Off Switch

This small lightweight electronic switch is extremely handy for switching on and off auxillary functions on all sorts of models. Plug the single lead into one of your spare channels for switching lights, bomb dropping, smoke systems, canopy operation and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to + - 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 30mm
Width: 13mm
Height: 3mm
Weight: 7g
Input Cable: 21cm (JR type plug)
Output Cable: 20cm (JR type socket)

Buy Now:-
http://www.rcproduct.in/other-items-and-parts/96-dr-mad-thrust-electronic-onoff-switch.html

Basher Nitro Circus 1/8 Scale 4WD Monster Truck (ARR) 

Features:
• Officially licensed by Nitro Circus
• Powerful 2075KV Brushless Inrunner Motor (Waterproof)
• 100A Brushless ESC w/ Reverse (waterproof)
• 18Kg Heavy Duty Steering Servo (waterproof)
• Full time 4WD
• Steel front, center and rear sealed differentials
• Hardened steel pinion gear
• Heavy duty drive shafts
• Hardened metal drive cups
• Full ball bearings
• 3.5mm alloy chassis plate
• Adjustable screw shock absorbers
• Oil filled, big bore shock absorbers
• 3.5mm shock shaft
• Adjustable toe-in and toe-out
• Adjustable camber and castor
• Independent wishbone suspension
• Shock tower support brace

Specs:
Length: 577mm
Width: 480mm
Height: 314mm (To top of cab)
Ground clearance: 110mm (Adjustable)
Battery area: 138mm x 46mm x 25mm

Included:
1/8 scale Nitro Circus Basher monster truck
Parallel battery adapter cable
Wheel wrench
Instruction Manual

Required:
2ch Car Radio
Charger for Li-poly battery
2 x 2S 5000mah packs in series
OR
2x large capacity 4S packs in parallel for increased run time (battery adapter required)

BUY NOW:-
http://www.rcproduct.in/rc-cars/94-basher-nitro-circus-18-scale-4wd-monster-truck-arr.html

When can you restock http://www.rcproduct.in/batteries-accessories/42-hobbyking-50watt-5a-x-chargerbalancer.html

i will add it in Next order..so no worry.

MT2213-935KV MultiStar Motor and Propeller Combo 10-4.5 CW CCW

Looking for the ultimate power system for your next Multi-rotor project?

Spec:
KV(RPM/V): 935
Lipo cells: 2-4s
Max Surge Watts(W): 200
Max.current(10s): 15 amps
No Load Current: 0.4 amps
Intemal Resistance: 0.180 ohm
Number of Poles: 14
Dimensions(Dia.xL): 27.9 x 25.7 mm (not counting the prop shaft)
Motor Shaft: 3 mm (not the prop shaft)
prop shaft: Slotted (DJI) style 8mm round (7mm flat to flat) stepped down to 6mm and a M6 prop nut
Prop: 10 x 4.7(3 cell) 8 x 4.5 (4cell)
Weight: 55g
bolt hole spacing: 16mm * 19mm

Buy NOW:-
http://www.rcproduct.in/brushless-motors/97-mt2213-935kv-multistar-motor-and-propeller-combo-10-45-cw-ccw.html


MOD EDIT

Priced at 1250