RC India Second Birthday Sweepstakes - India's open forum for RC flying, aeromodelling, cars and hobby stores

If I get the computerised radio, at least mixing and control would be better at field and then v-tail mixing, Elevon mixing would require no mechanical way for me like below. Moreover, I can offer for demonstration & Use my radios to new members of our newly instructed BE&SU Aero-modeling club as it is just a baby and no one of us have computerised radio for demonstration and hands on flying adjustment for those mixing.

Already donated from my side
======================
1.) 12 nos each (Yellow and White) 3mm Coro sheet of 6.5' x 4.5' is available.
2.) 3.5' long joint free bamboo pieces (Used for making kite spar).
3.) 3 bottles of CA Glue of 20 gm
4.) 110 gm of Fevi-tite.
5.) 0.5" x 0.5" wooden batten for support of SPAD.
6.) Hot wire cutter (20 gm of 40SWG nicrome, 40V,5A Supply, 4A Variac, Multimeter).
7.) different depron packing (High dencity) is kept available for hot wire cuttng and finishing.
8.) 20 micron golden covering for gliders 24 Sheets (1 Dista).
9.) 200 gms of Nylon rubber band 3" for rubber gliders as well as wing fixing.
10) Printed SPAD details in coloured photos.
11) 50 watt Soldering Iron with 50 gms of solder.
12) plenty of wire. nuts, screws of diff. size.
13) Sharp knife 12mm & 25mm with 10 blade pack.
14) PCB Drill.
15) IC Vero board 5 Nos. (for separate V-tail mixer or elevon mixer if required & we can build).
16) Portable Bench Vice.
17 A few books in printed forms already shared with you.

All my equipments has kept there for use of all demonstration and use of members.
==============================================================
1) LiPO, Servos (5gm & 8 gm), 2022 BL Motors, 11x4.7 & 10x6 prop, Prop saver, Hinges etc purchased from VKSingh.
2) 6Ch E-Sky Tx+Rx, LiPO Charger, Purchased from Bill.
3) 2 channel Tx+Rx with 2 brushed motor, NiCD pack & prop purchased from KPLKUM.

Therefore the UTILIZATION of the sweeptakes be maximum I think and of course, I will be very happy to win and owning this after standing on own leg of our club (after 50 members ? or wining any prize from compitition). However, Winner is winner and no matter who win, just request to give him so that he cannot use it for business (for purchasing of another, sells it).

Rohit Gupta also doing his best. He kept his cessna RTF at our club for demonstration.

Anything missing that needs (Bulsa? I hate bulsa as costly as well as imported, rather in favor of VC to use local light wood or make SPAD or buy complete kit.)

However, i don't prefer canvassing but doing here for kind consideration and grater application & Utilisation of the sweeptakes and favouring if available). Will post further after the exam of the members.

Now sharing with you another grate sweeptake as under. Link hidden for 1egality as dont want to litter.
http://f4k3url.com/5s3pm7g

Thanks