Pilot (OK Model) Shooting Star 40 L in Corro

Started by sanjayrai55, February 26, 2015, 12:58:38 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

sanjayrai55

Wanted to build a 40 size Nitro in Corro, and decided to adapt the Pilot Shooting Star 40 L, designed by Y Matsumoto

Plans on outerzone.co.uk




sanjayrai55

#1
Don't have retracts  :'(

But will use flaperons  ;) ;D




sanjayrai55

Bit different from my normal corro builds

The designer suggests a weight of 2.45 to 2.8 Kg. My judgement tells me that in corro, this will be around 2 Kg only. As the engine weight would be the same (actually more, as I will be using an OS 55AX) it will be very nose heavy. So Will mod it accordingly

sanjayrai55

#3
Used a 12 mm Balsa spar

The wing is swept back and tapered too.

The top is flat, and the underside tapers upward forming a dihedral on the bottom




K K Iyer

Great choice.
Look forward to seeing one again after over 30 years.
Good that you'll have flaps, as she'll fly/land rather faster than our electrics...

sanjayrai55

At a 60"span, I did not feel too happy about using the normal corro ailerons. So I stuck a balsa TE (10 mm) and will use balsa ailerons. These will be made from 6 mm + 4 mm balsa sheets glued together and sanded to shape

sanjayrai55

Quote from: K K Iyer on February 26, 2015, 01:08:08 PM
Great choice.
Look forward to seeing one again after over 30 years.
Good that you'll have flaps, as she'll fly/land rather faster than our electrics...

Have you seen this model before sir? I looked in RCG, RCU etc. for a build log/Flight test but couldn't find one

sanjayrai55

#7
Wingtips from HD thermocole, epoxied in



sanjayrai55

#8
Will be using 2 X 17 gram Metal Gear Servos for Ailerons




K K Iyer

John and Arvind used to fly one in Polo Ground / IITK in the early 80's.
Will check if it is still around.

Your build log will become the standard reference!
Send a link to SteveWMD. Perhaps he can attach it to the plan download page.
Will the 55 not be too much?

Edit: I think i'll send any further interjections as PMs, otherwise it disrupts the continuity of the build log.

sanjayrai55

John I knew; Arvind?

I have only a 55, it doesn't have to be flown at WOT  ;) ;) :giggle:

Don't PM unless it's a Personal Message  :rofl:

sanjayrai55

#11
Fuse is normal 4 mm Corro, but with a lot of reinforcement

2 mm lite-ply lining in the front half, and triangle stock at the back




sanjayrai55

#12
I make a " crutch" from 5 mm close fluted corro in the front. The tank rests on top, and the main u/c contacts it to spread the load, plus it is a structural member




sanjayrai55

Black enamel paint used for fuel-proofing the wooden parts which could be exposed to fuel

sanjayrai55

#14
Decided to make a Balsa Block half-cowling - because I've never done it before  :giggle: :giggle:




sanjayrai55

#15
Missed this pic  8-)

Oh, and I drilled and tapped the GRN mount. Will put a single nyloc nut at the end


sanjayrai55

#16
Cowl






sanjayrai55

#17
Decided I needed a cockpit too  >:D


sanjayrai55

#18
......and a turtle-deck  >:D >:D >:D




sanjayrai55

#19



sanjayrai55

#20
The tail feathers are made from 2 sheets of 3 mm corro glued together, reinforced with some 3 mm Carbon Fibre round tube




niranjanrao

Awesome..Just speechless... Keep up the good work Sir. :salute:

sahilkit

Hi sanjay,

The lite ply you are using can be got from local plywood dealers ?. With what material are you planning to cover bottom part of the fuse ?.
Today might be a great and wonderful day. It depends on you.

sanjayrai55


sanjayrai55

Quote from: sahilkit on February 26, 2015, 07:08:23 PM
Hi sanjay,

The lite ply you are using can be got from local plywood dealers ?. With what material are you planning to cover bottom part of the fuse ?.

1. I got the ply from Mr. Krunal Gajjar, gajjark on the forum
2. This detail will shortly follow. I have posted about 10 Corro builds on this forum, have a look

sanjayrai55

#25

sanjayrai55

#26

sanjayrai55

#27

sanjayrai55

#28

sanjayrai55

#29

sanjayrai55

#30





sanjayrai55

#31

sanjayrai55

#32



sahilkit

just finished seeing some of your builds, what will happen if one keeps the bottom of the fuse open and fly?


Today might be a great and wonderful day. It depends on you.

sanjayrai55

Depends on the kind of model. On a trainer, nothing too much except dirt

On a sports/performance model, will create turbulence. Inverted flying will be difficult

sanjayrai55

However without the bottom sheeting the fuse will have a twisting tendency. The rigidity comes from the box structure. So when the fuse flexes and twists the tail feathers too will move. The controls will be very fuzzy

Dr. Abhishek Agrawal

Great Build Sanjay Sir All the best for Maiden :thumbsup: :thumbsup:
(Sky Surfer V2 , Tiger Trainer MK III nitro , Arising Star nitro, Beetle QuadCopter ,Futaba T6 EX  Tx , Q450 Quadcopter with DJI NAZA M, JR XG 6 Tx , Techone Arrow 3D, Extra 300s 3D, Lil Ripper 3D foamy,  LH X1mini quadcopter, HJT EPO Quadcopter,Funtana 3D,FLYGUY 46" Superman, F-35 Jet, Mig-25 Foxbat Jet,    Frsky TARANIS PLUS TX , FT VERSA WING ,RC Flying Eagle,FT Spear wing, FT GUINEA PIG TWIN MOTOR, DJI Phantom 4 PRO, DJI MAVIC PRO,TBS,  5" Racer Quad, TARANIS Qx7,I )

sanjayrai55


sahilkit

Today might be a great and wonderful day. It depends on you.

asupan

Wonderful Build Sir. Lovely looking model.

All the best for a good maiden flight.

sanjayrai55


ashok baijal


Rcjabalpur

#42
What a build , if you ask me it looks like a balsa plane .
Hobbico next star | sky surfer V2 | .46 High wing trainer | O.S .46 Ax | O.S .46 La | O.S 55 AX | super tigre .10 motor | Spektrum DX5e | FUTABA 10J | Hitec X4 Eighty | Phoenix Scanner | Multiplex Twinstar ii

Acquiring soon |  no plans as of yet  |

The ultimate responsibility of the pilot is to fulfill the dreams of the countless millions of earthbound ancestors who could only stare skyward and wish.

v2 eagle

Exactly, it looks like a rtf one.
FPV with head goggles

http://ashokpkumar.wix.com/mysite

sanjayrai55

Ashok-ji, Raj, Ashok v2 - Thanks very much  :thanks: :thanks: :thanks:

sanjayrai55

Many feel Corro models are not good-looking, and difficult to build

I hope to show the converse also is true

And, I hope it flies  ;D :giggle: :giggle:

sanjayrai55

#46



sanjayrai55

I deliberately added reinforcement wherever I could to increase the weight. Finally at 2.1 Kg (4.6 lbs) with the Rx battery and an empty tank

Use a Sullivan 300 cc tank with 3 tube system

sanjayrai55

#48
I had bought some time ago 2400 mah NiMh LSD batteries from HK. Made a Rx pack from them








sahilkit

Hi sanjay

How does one balance a glow model ? (W-fuel or W/O fuel)

Sahil
Today might be a great and wonderful day. It depends on you.

sanjayrai55

Try and figure it out. What will happen to the model's balance as the fuel is expended?

sahilkit

Tail heavy when fuel tank is empty but if one balances with fuel then after tank become empty model tends to be nose heavy so........... :headscratch:

Edit: Wait

1. Balance model with out fuel and then add fuel becomes nose heavy and when empty balances again.
2. Balance model with fuel and when empty tail heavy.
Today might be a great and wonderful day. It depends on you.

sanjayrai55

.....and better nose heavy than tail heavy, especially if your fuel unexpectedly gets over and you have to make a dead-stick landing - then you sure don't want it tail-heavy  ;)

sahilkit

correct don't want it tail heavy especially in windy conditions starts acting bouncy and hard to control.
Today might be a great and wonderful day. It depends on you.

K K Iyer

Quote from: sanjayrai55 on February 27, 2015, 07:54:55 PM
Try and figure it out.

With due apology to Sahilkit (not aimed at him!)
This is THE BEST ADVICE to newbies who won't make the effort, and expect to be spoon fed.

sahilkit

Today might be a great and wonderful day. It depends on you.

docnayeem

Sanjay sir....  Again a beautiful build... Hats off....

rcrcnitesh

Re:
#57
What to say, I have no words.
Maker | Aeromodeller | Teenager

sanjayrai55


sanjayrai55

Maiden washed out today - heavy rain since 4 am :(

sahilkit

Today might be a great and wonderful day. It depends on you.

sanjayrai55

Wrong place. Post your question in the appropriate section/thread. Better read RC Gems: http://www.rcindia.org/rc-india-forum/the-rc-india-gems/

manojswizera

Missed the thread sanjay sir,
awesome build .
Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

sanjayrai55


ppcruise

When I first saw this I thought this was an RTF!!!!! But then I realised who was posting this and I knew it couldn't be :-)

You sir, by far, are the most amazing builder.
Taranis X9D Plus | Blade 180CFX | FT Spitfire | FT Slinger | WLToys V922 | WLToys V911

girishsarwal

Sanjay sir, mods will have to run a separate sweepstakes for you, where all your models will qualify, the mods wont need a judge and we all know who will win. That is one of the finest builds. I love the stars on the empennage. Lucky to have seen this model in its making.  :salute:
gs

wingmanbunty

EAT ,SLEEP , FLY

sanjayrai55

Thank you Pratyush, Girish, Bunty  :thanks: :thanks: :thanks: very much

gaurang.1972

Sanjay sir again i am late but your build is excellent you r genius  hates off to u  :hatsoff: :hatsoff: :hatsoff: and good luck for maiden and waiting for maiden video

sanjayrai55


rastsaurabh

Sanjai sir this is an excellent build as usual..... just curious to know what is OK MODEL mentioning in title

sanjayrai55


maahinberi

Still waiting for videos.................................... :headscratch:
Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.

sanjayrai55


maahinberi

Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.

sundaram

May the soul of the beauty rest in peace.  :(

sanjayrai55

Still a virgin

Looking for a ground.

Else, I know a couple of chaps in Lucknow with super facilities...........

sanjayrai55

Actually I built the Cherokee for the sweepstakes, so had to take out the engine and put it on that

After the maiden, the Cherokee too lies desolate for want of a field :(

rcpilotacro

Quote from: sanjayrai55 on June 02, 2016, 04:43:10 PM


Else, I know a couple of chaps in Lucknow with super facilities...........

Private RC runway, open field all around, cant ask for more :)
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sanjayrai55

And a couple of expert RC Pilots for when you get into trouble  >:D

(who are also great company,some of the nicest guys on the Indian RC Scene  ;D )

sundaram

Thanks sir. We are blessed to be in yours.

I am very sorry. I totally mistook on it on the earlier reply. All the very best for the first flight sir.

On the way to lucknow will be honoured to fly it If you have not done it by then already.

PS: Diminishing flying space is a sad trend of late sir. Heard about Bangalore guys Hoskote fiasco too recently.

Sent from my GT-N7100 using Tapatalk