|
Title: Build and fly X Quad 525 from HK for FPV Post by: sundaram on February 28, 2013, 04:58:14 PM I have not bought the complete kit of Hobbyking X 525 form HK but have bought only Parts for the same
4 x GF four motor Mount plates (http://www.hobbyking.com/hobbyking/store/catalog/9323000015.jpg) GF Top Plate and bottom plate (http://www.hobbyking.com/hobbyking/store/catalog/9323000013.jpg) (http://www.hobbyking.com/hobbyking/store/catalog/9323000012.jpg) Square boom sets of four (http://www.hobbyking.com/hobbyking/store/catalog/9323000017.jpg) Hardware set (http://www.hobbyking.com/hobbyking/store/catalog/9323000018.jpg) Motors Turnigy 2830 800 KV (http://www.hobbyking.com/hobbyking/store/catalog/T2830-800.jpg) ESC Hobbyking SS series 25-30 Amps (http://www.hobbyking.com/hobbyking/store/catalog/HK-25-30.jpg) Propellers 10x4.5 The legs and the camera mount will be self designed and made. FPV gear is HK HD camera II and 400MW 5.8 gHZ Video Tx Rangevideo. FC Board Multiwii SE Ver 2.0 from HK which will be removed from my Micro quad for this and used with Bluetooth telemetry and Ublox 6M GPS which is with Eprom. Title: Re: Build and fly X Quad 525 from HK for FPV Post by: sundaram on August 06, 2014, 12:25:28 PM I realized having fun with all and only the planes, I was left out with only one Micro quad and no Quad for taking Gopro up in FPV. Decided to jump-start this left out project.
Making one conventional X-Quad with rail for FPV and one modified reptile clone with X525 and a reptile kit thanks to RCMUMBAI. (https://lh4.googleusercontent.com/-m3XHPtoEpR4/U-HP20u2fGI/AAAAAAAACEc/3Fu1EHT725g/w607-h809-no/20140806_120659.jpg) (https://lh6.googleusercontent.com/-z_xnUFlTigM/U-HPY6oTE1I/AAAAAAAACEE/Joo3r0GPvnk/w958-h719-no/20140806_120513.jpg)(https://lh4.googleusercontent.com/-qTxy0tD-trE/U-HPh_bFeiI/AAAAAAAACEM/CIiCMpaIJSw/w958-h719-no/20140806_120524.jpg) (https://lh3.googleusercontent.com/-JW7EZu4wqk4/U-HPua9YX9I/AAAAAAAACEU/3i_p1gaFUcE/w958-h719-no/20140806_120610.jpg) |