Hello Guys
So I got my flip32+ from banggood today. I went ahead and flashed it with cleanflight and calibrated the accelerometer and magnetometer. but I'm facing a big problem. I've uploaded the video regarding the same.
Help Needed. :help: :help: :help: :help:
http://youtu.be/8cRPg3y23BY (http://youtu.be/8cRPg3y23BY)
how did you calibrate the compass with the usb cable attached ?
check the voltage being supplied by the cable
run thru the calibration process again
I calibrated the compass by rotating it on all 3 axis. The USB voltage is fine. I tried with different cables and different PCs. It's not wobbling like before but now when I give slight yaw movement to the board it shows very large deflection.
Even when the board is kept undisturbed, the magnetometer heading readings keep changing.
Quote from: ved on June 19, 2015, 11:55:22 AM
Even when the board is kept undisturbed, the magnetometer heading readings keep changing.
that is not abnormal
put it on something and fly it . you will not need the compass
to get in the air
I solved the problem. But I had to loose my magnetometer. On RCGroups I read that you can disable the magnetometer by cutting the SCL trace. So I took a risk and went ahead and luckily it worked. The board is working all good now. Thanks saikat sir for your help.