Hi
I am nikhil from bangalore i am planning to start with the autonavigation multirotor using Ys x6 / mikro kopter board i need some one from bangalore who is interested in teaching me flying and interested to work with me , i stay in yelahanka new town bangalore
for auto navigation check this link.
http://diydrones.com/
if you are serious about hobby i would recommend you get good hands on RC heli / plane first and then go into
multirotors.
get in touch with local clubs there and you will get really good information.
http://www.rcindia.org/rc-locations-and-clubs/permission-at-jakur-bangalore/
I am good in rc planes but not perfect so i decided to start with multirotors
ITS GOOD & BEST IDEA
Quote from: Robologix on December 18, 2012, 10:28:37 PM
I am good in rc planes but not perfect so i decided to start with multirotors
Ok, Sounds good!
you should split your project in 2 phases
1) Build Quad
2) Then set it up for auto navigation
For building multirotor you can use cheap board from HK for auto navigation you will need more advanced board like APM 2.5 or DGI .
also search forum for build logs ..it help you a lot.