i am using 2800 mah for my tricopter,
motor: 1200 kv. max current 16 A and for 3 motors 48 A
my tricopter is just rotating on the ground and not fllying. all the setting i have done correctly. i am using kk 2.1.5 board
guide me
my copter weights only 500 grams, but when i start it is just spining not flying what can i do....
specification 18 inch each arms, separated by 120 degree
my setting are
Roll/Pitch (Aileron/Elevator)
P Gain : 30
P Limit : 100
I Gain : 3
I Limit : 20
Yaw (Rudder)
P Gain : 30
P Limit : 20
I Gain : 3
I Limit : 10
Stick Scaling
Roll & Pitch : 50
Yaw (Rudder) :70
Throttle : 100
it is considerably rotating and not flying
Please guide me
Reply
Check whether if the numbers(Size of props) ON THE PROPS is on upside.
Then see the orientation of kk 2.1.5, And with respect to this see if the motor layout is right or not. And the motor direction And props.
Hope you know about the fact that props can also be of two types cw and ccw :)
It will be more easy to answer if you can post a video link
you say rotating right! are your propellers of proper rotation as required ?